Liebherr Dishwasher Error E5

DIY Fix Check for standing water and basic drainage issues

1. Turn off and unplug the dishwasher for safety.
2. Open the dishwasher and inspect the bottom for any standing water.
3. Remove and clean the filter at the base of the dishwasher if accessible.
4. Check the drain hose for kinks or visible obstructions.

DIY Fix Attempt simple reset and remove excess water

1. Unplug the dishwasher or switch off the circuit breaker for a few minutes.
2. Tilt the dishwasher slightly backward (with towels under the front feet) to help drain any trapped water if safe to do so.
3. Restore power and run a short cycle to see if the code clears.

Technician Only Inspect drain pump and related components

1. Verify drain pump function and test for proper operation.
2. Inspect and clear any debris from the drain pump area.
3. Test drain pump motor continuity with appropriate tools.
4. Check internal drainage pathways and pressure sensors.

Parts needed: drain pump, filters, drain hose

Technician Only Check for flooding sensor activation or internal water leaks

1. Access the base of the dishwasher and check for water contacting the flood sensor.
2. Inspect internal hoses for leaks.
3. Confirm correct routing and connection of overflow and base drain lines.

Parts needed: flood sensor, internal hoses