LG Washing Machine Error F4
⚡ Quick Answer: The LG washing machine F4 error indicates a potential failure in the door lock mechanism, which can prevent the machine from starting. Users may notic... ✅ DIY Fixable
What Does Error F4 Mean?
The LG washing machine F4 error indicates a potential failure in the door lock mechanism, which can prevent the machine from starting. Users may notice the door not locking properly, and the machine may display the F4 code during the wash cycle, leading to a halt in operation. This error may also be linked to issues with water filling or sensing, although the exact cause remains unverified.
Common Symptoms:
- Machine displays F4 code during wash cycle
- Machine may stop operation or fail to proceed
- Possibly associated with filling or sensing issues (based on community reports)
Possible Causes
- Door Lock Assembly
- Wiring Issues
- Control Board Malfunction
How to Fix Error F4
DIY Fix Basic checks for water supply and hoses
- Ensure water supply valves are fully open.
- Check that inlet hoses are connected properly and not kinked or blocked.
- Inspect inlet hose filters and clean debris if present.
- Power cycle the washing machine (turn off, wait ~1 minute, then on again) and see if error persists.
Technician Only Professional diagnosis and repair
- Use OEM diagnostic tools to read error logs and confirm true fault code meaning for this specific LG model.
- Inspect water inlet valve, pressure sensor and related wiring.
- Test temperature sensors and control board per manufacturer testing procedures.
- Repair or replace failed components as identified.
Parts needed: Water inlet valve, Pressure sensor / water level sensor, Temperature sensor (if applicable), Control board (if indicated by diagnostics)
- If the F4 error persists after basic checks.
- If water supply and hoses appear normal but the machine fails to fill or operate.
- If diagnostic steps require access to internal components.
Next step
Choose the next step for F4
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Door Lock Assembly |
| resistance | 10-20 ohms |
| part_number | LG 6601N-001655 |
| voltage_rating | 120V AC |
Common Questions
What does F4 error mean on LG washing machine?
F4 indicates a possible door lock failure, preventing the machine from starting.
Can I fix LG washing machine F4 error myself?
Yes, check water supply, hoses, and filters for blockages.
How much does it cost to fix F4 error?
Repair costs vary based on parts and labor; a technician assessment is needed.
When should I call a technician for F4?
Call a technician if the error persists after basic checks or if internal components need access.
Sources & References
- LG Washer - Error Code List (US Support) (official)
- LG Washing Machine Error Codes List (LGParts.com) (community)
Data last verified: 2026-07-26
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!