LG Washing Machine Error FE
⚡ Quick Answer: The LG washing machine FE error code indicates a water overflow issue, typically occurring during the fill or rinse cycle. This error is triggered whe... ✅ DIY Fixable
What Does Error FE Mean?
The LG washing machine FE error code indicates a water overflow issue, typically occurring during the fill or rinse cycle. This error is triggered when the washer detects an overfilling condition or incorrect water level readings. Symptoms may include the machine continuously filling with water, stopping mid-cycle, and draining without completing the wash. Common causes include a faulty water inlet valve, a malfunctioning pressure switch, or a clogged pressure switch hose.
Common Symptoms:
- Machine overfills with water
- Washer stops mid‑cycle and drains continuously
- FE code displayed during filling or rinse phase
Possible Causes
- Faulty water inlet valve (medium)
- Pressure switch / water level sensor fault (medium)
- Clogged or damaged pressure switch tube or hose (medium)
How to Fix Error FE
DIY Fix Basic user troubleshooting
- Turn off and unplug the washing machine immediately to prevent overflow
- Check that inlet hoses are properly connected and not kinked
- Ensure water supply valves are fully open
- Clean inlet hose filters if accessible
Technician Only Inspect and test key components
- Test the water inlet valve for proper operation and replace if faulty
- Inspect and test the water level sensor/pressure switch and replace if malfunctioning
- Check and clear or replace pressure switch hose if blocked or damaged
- Verify wiring continuity between sensors and control board
Parts needed: water inlet valve, pressure switch / water level sensor, pressure switch hose
- If error persists after basic checks or if internal components like inlet valve or sensors need replacement.
- If you observe leaks, electrical smells, or the washer fills even when off.
Next step
Choose the next step for FE
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Water Level Sensor |
| resistance | 10-20 ohms |
| part_number | LG 6601ER1006B |
| voltage_rating | 120V AC |
Common Questions
What does FE error mean on LG washing machine?
The FE error indicates a water overflow issue, often causing the machine to overfill or stop mid-cycle.
Can I fix LG washing machine FE error myself?
Yes, you can troubleshoot by checking hose connections and ensuring valves are open. Turn off and unplug the machine first.
How much does it cost to fix FE error?
Repair costs for the FE error range from $50 to $250 for parts, depending on the specific model.
When should I call a technician for FE?
Call a technician if the error persists after basic troubleshooting or if you notice leaks or electrical smells.
Data last verified: 2026-07-26
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!