LG Washing Machine Error E5
⚡ Quick Answer: The LG washing machine error E5 typically indicates a failure in the door lock mechanism, preventing the door from locking or unlocking correctly. Thi... ✅ DIY Fixable
What Does Error E5 Mean?
The LG washing machine error E5 typically indicates a failure in the door lock mechanism, preventing the door from locking or unlocking correctly. This malfunction may cause the washing machine to stop mid-cycle, resulting in issues with filling or draining water. Basic troubleshooting steps include ensuring the door is fully closed and checking the water supply. If the error persists, further investigation is needed to diagnose potential issues with the door lock assembly or related components.
Common Symptoms:
- Washing machine stops mid‑cycle when code displayed
- Machine may not fill or drain (from general community reports)
- Door/lid or sensor related malfunction indicated in non‑LG contexts
Possible Causes
- Door Lock Assembly
- Wiring Issues
- Control Board Malfunction
How to Fix Error E5
DIY Fix Check basic water supply and door/lid status
- Ensure water supply is turned on and hoses are not kinked or blocked.
- Check that the washer door or lid is fully closed and latched.
- Turn off the machine and unplug it for at least 30 seconds, then restart.
Technician Only Diagnostics for undefined E5 on LG models
- Using service mode or diagnostic tools, check door lock/lid switch circuits.
- Check water inlet valves and water level/pressure sensor functionality.
- Verify control board for any logged faults or sensor communication issues.
Parts needed: Door lock/lid switch assembly, Water inlet valve, Water level sensor/pressure switch, Control board (if other components ruled out)
- If error persists after basic checks and reset attempts
- If machine shows additional fault codes or abnormal noises
- If door lock or water issues are suspected but unresolved
Next step
Choose the next step for E5
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Door Lock Assembly
Secures the door shut during operation for safety and signals the control board to run.
- Typical part-only price
- $30 - $75
- DIY difficulty
- Easy
- Estimated time
- 10-20 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Door or Lid Switch
Detects whether the appliance door or lid is safely closed before operation.
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Door Lock Assembly |
| resistance | 0-10 ohms |
| part_number | LG 6601N-0031A |
| voltage_rating | 120V AC |
Common Questions
What does E5 error mean on LG washing machine?
E5 error indicates a failure in the door lock mechanism, causing the machine to stop mid-cycle.
Can I fix LG washing machine E5 error myself?
Yes, check if the door is fully closed and ensure the water supply is on. Restart the machine after unplugging it for 30 seconds.
How much does it cost to fix E5 error?
Repair costs vary; diagnostics typically range from $100–$200, with parts costing $30–$150 or more.
When should I call a technician for E5?
Call a technician if the error persists after troubleshooting, or if you notice additional fault codes or unusual noises.
Sources & References
Data last verified: 2026-07-26
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!