Lg Refrigerator Error Er IF

⚡ Quick Answer: The LG refrigerator error code Er IF indicates a problem with the ice maker fan, which may be caused by ice buildup or a malfunctioning fan motor. Sym... ✅ DIY Fixable

What Does Error Er IF Mean?

The LG refrigerator error code Er IF indicates a problem with the ice maker fan, which may be caused by ice buildup or a malfunctioning fan motor. Symptoms typically include the ice maker not producing ice, frost accumulation in the ice maker area, and unusual noises emanating from the ice compartment. To resolve this issue, defrost the area and check for obstructions, or consider replacing the fan motor if problems persist.

Common Symptoms:

  • Ice maker not producing ice
  • Frost buildup around ice maker area
  • Error code displayed on control panel
  • Uneven cooling or warm spots near ice compartment
  • Buzzing or unusual noises from ice compartment

Possible Causes

  • Ice buildup around the ice maker fan causing it to seize (high)
  • Faulty or burned-out ice maker fan motor (medium)
  • Wiring or connection issues between fan and control board (medium)

How to Fix Error Er IF

DIY Fix Defrost and check ice buildup

  1. Unplug the refrigerator from power.
  2. Open both freezer and fridge doors to allow warm air in.
  3. Wait for several hours (or use gentle steam/hairdryer at low heat targeted at the vent) to melt ice around the ice maker fan.
  4. Wipe up melted water and dry the area.
  5. Restore power and check if the error clears.

DIY Fix Inspect for fan obstruction or manual fan test

  1. After defrosting, locate the ice maker fan area (refer to manual or trusted model-specific guide).
  2. Check visually for obstructions or ice debris.
  3. Gently try to turn the fan blade by hand (power off) to see if it spins freely.
  4. If it still doesn’t move freely, the fan likely needs repair or replacement.

Technician Only Replace ice maker fan motor

  1. Disconnect refrigerator from power.
  2. Remove freezer rear panel or access panel per model instructions.
  3. Disconnect the fan wiring harness.
  4. Remove the defective ice maker fan motor and install OEM replacement.
  5. Reassemble panels and restore power to verify operation.

Parts needed: ice maker fan motor assembly, gaskets/seals if disturbed

Technician Only Inspect and repair wiring/connectors

  1. Unplug refrigerator and access fan wiring harness.
  2. Inspect for frayed, pinched, or broken wires.
  3. Repair or replace damaged wiring and ensure secure connections.
  4. Test fan operation and clear error code.

Parts needed: wiring harness, connectors

🛑 When to Call a Pro:
  • Error persists after defrosting and basic checks
  • Fan does not spin freely after ice is cleared
  • Visible electrical damage or complex internal access required

Technical Specifications

wattage 100W
component Ice Maker Assembly
resistance 10-20 ohms
part_number LG 5989JA0002D
voltage_rating 120V AC

Common Questions

What does Er IF error mean on lg refrigerator?

Er IF indicates an issue with the ice maker fan, often due to ice buildup or fan malfunction.

Can I fix lg refrigerator Er IF error myself?

Yes, you can defrost the ice maker area and check for obstructions.

How much does it cost to fix Er IF error?

Repair costs range from $40-$80 for parts, and $200-$350 including labor.

When should I call a technician for Er IF?

Call a technician if the error persists after your checks or if the fan doesn't spin freely.

Sources & References

Data last verified: 2026-01-10

User Comments (0)

Share your experience or solution below.

Be the first to comment!