LG Dishwasher Error CE
⚡ Quick Answer: The LG Dishwasher CE error code indicates a communication issue between the motor and control unit, often due to abnormal motor operation. Symptoms in... ⚠️ Difficulty Varies
What Does Error CE Mean?
The LG Dishwasher CE error code indicates a communication issue between the motor and control unit, often due to abnormal motor operation. Symptoms include the dishwasher stopping mid-cycle, displaying the CE code, and making unusual motor sounds or failing to engage the wash pump. Addressing this issue usually involves inspecting the motor assembly, control wiring, and possibly replacing faulty components.
Common Symptoms:
- Dishwasher stops operation and displays CE code on control panel
- No normal wash cycle progression
- Possible unusual motor sounds or failure to start wash pump
Possible Causes
- Motor abnormality (wash pump/motor issue) (medium)
How to Fix Error CE
DIY Fix Perform basic reset
- Turn off the dishwasher and disconnect power (unplug or turn off breaker).
- Wait 1–2 minutes to allow internal capacitors to discharge.
- Restore power and restart a cycle to see if CE clears.
Technician Only Inspect and test motor assembly & control wiring
- Disconnect power at the breaker.
- Remove access panel to reach motor/wash pump assembly.
- Inspect motor wiring harness and connectors for loose, damaged, or burnt connections.
- Test motor windings and wash pump operation with multimeter as per service manual specs.
- Verify control board output to the motor and test PCB for faults.
Parts needed: motor/wash pump assembly, motor wiring harness, main control board (PCB)
- After basic reset attempts if CE reappears immediately.
- If any wiring appears burnt or damaged.
- If motor tests show abnormal resistance or failure.
- If unfamiliar with safe electrical testing and appliance internals.
Next step
Choose the next step for CE
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Dishwasher Circulation Pump
Circulates pressurized water through the dishwasher spray arms during the wash cycle.
- Typical part-only price
- $90 - $220
- DIY difficulty
- Hard
- Estimated time
- 60-120 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does CE error mean on LG Dishwasher?
The CE error indicates a motor communication error, causing the dishwasher to stop and display the error code.
Can I fix LG Dishwasher CE error myself?
Yes, you can perform a basic reset by turning off the dishwasher and disconnecting power for a few minutes.
How much does it cost to fix CE error?
Estimated repair costs range from $150 to $450, depending on parts and service rates.
When should I call a technician for CE?
Call a technician if the CE error reappears after a reset or if you notice burnt wiring or if you're unsure about testing the appliance.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!