Lemair Dishwasher Error E5
⚡ Quick Answer: The Lemair dishwasher error E5 indicates a malfunction in the drain pump, often resulting in standing water in the tub and unusual sounds during opera... ✅ DIY Fixable
What Does Error E5 Mean?
The Lemair dishwasher error E5 indicates a malfunction in the drain pump, often resulting in standing water in the tub and unusual sounds during operation. This error may occur if the drain pump fails to remove water properly, causing the dishwasher to stop mid-cycle. Regular cleaning of the filter and ensuring no blockages in the drain hose can help mitigate this issue.
Common Symptoms:
- Dishwasher displays E5 on control panel
- Standing water in dishwasher base or tub
- Dishwasher stops mid‑cycle
Possible Causes
- Drain Pump
- Blocked Drain Hose
- Faulty Control Board
How to Fix Error E5
DIY Fix Basic checks for dishwasher showing E5
- Power off the dishwasher and unplug it or switch off at circuit breaker.
- Check bottom of dishwasher for standing water and remove if present.
- Inspect and clean the filter basket at bottom of dishwasher.
- Check drain hose for kinks, bends, or blockages and clear debris if visible.
- Ensure the dishwasher is level and hoses are connected properly to external drainage.
Technician Only Technician inspection if E5 persists
- Inspect internal drainage system, including pump, impeller and drain hose for internal obstructions.
- Test and verify proper function of flood sensor / water sensor inside dishwasher base.
- Check wiring and connectors for loose or damaged connections related to drainage components.
- If flooding or sensor fault is confirmed, replace the affected sensor or drainage pump as appropriate.
Parts needed: Drain hose, Drain pump, Flood/water sensor
- Error persists after cleaning filters and hoses
- Standing water remains after attempted removal
- Unusual noises from pump or suspected internal leak
Next step
Choose the next step for E5
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
- Typical part-only price
- $15 - $30
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E5 error mean on Lemair dishwasher?
E5 indicates a drain pump malfunction, often resulting in standing water and unusual sounds.
Can I fix Lemair dishwasher E5 error myself?
Yes, you can power off the dishwasher, check for standing water, and clean the filter basket.
How much does it cost to fix E5 error?
Estimated repair costs range from $100 to $300 for parts and labor.
When should I call a technician for E5?
Call a technician if the error persists after cleaning, if water remains, or if you hear unusual noises.
Sources & References
- E5 Error Code - Dishwasher - Help Centre (community)
- Forum: A quoi correspond un code E5 (community)
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!