Lemair Dishwasher Error E2
⚡ Quick Answer: The Lemair dishwasher E2 error indicates a drainage failure, typically caused by an obstruction in the drainage system. Common symptoms include standi... ✅ DIY Fixable
What Does Error E2 Mean?
The Lemair dishwasher E2 error indicates a drainage failure, typically caused by an obstruction in the drainage system. Common symptoms include standing water in the tub after a cycle, the dishwasher not advancing through its cycle, and the error appearing during or after the wash or drain phase. To address this issue, check for blockages in the drain filter and hose, as well as listen for unusual sounds from the pump, which may indicate a malfunction.
Common Symptoms:
- Standing water in tub after cycle
- Dishwasher not advancing cycle
- Error appears during or after wash/drain phase
Possible Causes
- Drainage obstruction (pattern from general dishwasher sources) (medium)
How to Fix Error E2
DIY Fix Check drainage and filters
- Turn off and unplug dishwasher
- Remove and inspect drain filter for debris
- Check drain hose for kinks or blockages
- Ensure return hose is correctly positioned and not elevated above recommended height
Technician Only Inspect and service drain system
- Test and clear drain pump and hose
- Verify drain pump operation and replace if faulty
- Check and clean any air gap or disposal connection
- Confirm sensor/float operation if present
Parts needed: Drain pump, Drain hose, Filter assembly
- If water continues to remain after basic drainage checks
- If drain pump runs loudly or not at all
- If error persists after clearing blockages
Next step
Choose the next step for E2
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Dishwasher Filter
Screens food debris from recirculating wash water and protects the pump system.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E2 error mean on Lemair dishwasher?
The E2 error signifies a drainage failure, often due to blockages preventing water removal.
Can I fix Lemair dishwasher E2 error myself?
Yes, you can check and clean the drain filter and hose to resolve the issue.
How much does it cost to fix E2 error?
Estimated repair costs range from $50 to $200, depending on parts needed.
When should I call a technician for E2?
Call a technician if water remains after checking for blockages or if the pump is noisy or non-functional.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!