KitchenAid Microwave Error F2E3
⚡ Quick Answer: The KitchenAid microwave error F2E3 indicates a potential issue with the touchpad or keypad, typically caused by a shorted key or wiring problem. User... ✅ DIY Fixable
What Does Error F2E3 Mean?
The KitchenAid microwave error F2E3 indicates a potential issue with the touchpad or keypad, typically caused by a shorted key or wiring problem. Users may notice the error code displayed on the control panel, unresponsiveness to input, and the code may reappear after a reset. If the problem persists, it’s advisable to visually inspect the keypad and wiring for faults.
Common Symptoms:
- Error F2E3 displayed on microwave control panel
- Microwave unresponsive to normal input
- Code may clear after cancel/reset but reappears
Possible Causes
- Keypad (touchpad) short or stuck key signal (medium)
- Loose or faulty wiring between keypad and control board (medium)
How to Fix Error F2E3
DIY Fix Basic Reset and Cancel Attempt
- Press the CANCEL or CLEAR button on the microwave
- If the code remains, disconnect the microwave from power (unplug or turn off circuit breaker)
- Wait about 60 seconds and restore power
- Check if error code reappears
Technician Only Inspect & Repair Keypad and Wiring
- Disconnect power and remove microwave control panel
- Inspect keypad connector and ribbon cable for secure connection and damage
- Test keypad for shorts or stuck buttons using multimeter
- Replace keypad assembly if faults are confirmed
- Verify wiring continuity between keypad and control board
Parts needed: Keypad/touchpad assembly, Keypad ribbon cable or connector
- If error persists after reset and visual inspection of keypad/wiring
- Signs of electrical damage, smoke, burning smell, or microwave not powering on correctly
Next step
Choose the next step for F2E3
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Ribbon Cable
Carries low-voltage signals between a user interface, display, and electronic control board.
- Typical part-only price
- $10 - $80
- DIY difficulty
- Medium
- Estimated time
- 20-60 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Microwave parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F2E3 error mean on KitchenAid microwave?
F2E3 indicates a touchpad/keypad malfunction, often due to a shorted key or wiring issue.
Can I fix KitchenAid microwave F2E3 error myself?
Yes, try resetting the microwave by pressing CANCEL or disconnecting it from power for 60 seconds.
How much does it cost to fix F2E3 error?
Repair costs range from $50 to $200 for keypad parts, plus additional labor fees.
When should I call a technician for F2E3?
Call a technician if the error persists after resetting and if you notice signs of electrical damage.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!