KitchenAid Cooktop Error F13
⚡ Quick Answer: The KitchenAid cooktop error code F13 indicates a malfunction in the temperature sensor due to an internal communication or CPU checksum error in the ... ✅ DIY Fixable
What Does Error F13 Mean?
The KitchenAid cooktop error code F13 indicates a malfunction in the temperature sensor due to an internal communication or CPU checksum error in the touch control module. This often results in erratic temperature readings or a complete failure of the cooktop controls, making them unresponsive. If the error persists even after normal usage or power cycling, further investigation is necessary.
Common Symptoms:
- F13 code appears on display
- Cooktop controls unresponsive or non‑functional after code appears
- Error persists after normal use or power cycling
Possible Causes
- Internal communication/CPU checksum error in touch control module (high)
- Loose or damaged wiring/connectors associated with touch control (medium)
How to Fix Error F13
DIY Fix Power reset the cooktop
- Turn off cooktop power at circuit breaker(s) for 1–2 minutes
- Turn breaker(s) back on
- Observe for up to 1 minute to see if F13 returns
Technician Only Inspect wiring and touch control connections
- Disconnect power to cooktop
- Remove necessary panels to access touch control module wiring
- Check for loose, damaged, burnt, or corroded wiring/connectors
- Secure or replace wiring as needed
- Reassemble and test
Parts needed: wiring harness, connectors
Technician Only Replace touch control module
- Disconnect power completely
- Remove old touch control module
- Install new touch control module matched to cooktop model
- Reconnect all wiring securely
- Test for resolution of error
Parts needed: touch control module
- If F13 error returns after power reset and basic visual wiring inspection
- If internal components show damage or if user is uncomfortable performing electrical work
Next step
Choose the next step for F13
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
- Typical part-only price
- $20 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Cooktop parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F13 error mean on KitchenAid cooktop?
F13 indicates a malfunction in the temperature sensor and unresponsive controls due to a CPU checksum error.
Can I fix KitchenAid cooktop F13 error myself?
Yes, try power resetting the cooktop by turning off the circuit breaker for 1-2 minutes.
How much does it cost to fix F13 error?
Estimated repair costs range from $20 to $100, depending on parts needed.
When should I call a technician for F13?
Call a technician if the F13 error returns after a power reset or if you're uncomfortable with electrical work.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!