KitchenAid Cooktop Error F03
⚡ Quick Answer: The KitchenAid cooktop F03 error code indicates a malfunction in the touch control module, leading to unresponsive controls or the appearance of stuck... ✅ DIY Fixable
What Does Error F03 Mean?
The KitchenAid cooktop F03 error code indicates a malfunction in the touch control module, leading to unresponsive controls or the appearance of stuck keys. This can result from an internal communication error within the cooktop's control system, causing incorrect temperature readings or failure to heat. Regular cleaning and power resets may resolve minor issues, but persistent errors require professional inspection.
Common Symptoms:
- Error code F03 displayed on cooktop control panel
- Cooktop unresponsive or control panel not accepting input
- Indication of touch control malfunction
Possible Causes
- Internal communication error between touch control and cooktop control system (high)
- Touch keys erroneously detected as permanently pressed (medium)
How to Fix Error F03
DIY Fix Power Reset the Cooktop
- Turn off the circuit breaker feeding the cooktop or unplug the cooktop from power.
- Wait at least 60 seconds.
- Restore power and check if F03 reappears.
- Observe control panel responsiveness.
DIY Fix Clean Touch Control Surface
- Wipe down the entire touch control area with a soft, dry cloth.
- Remove any grease, debris, or liquid that might be causing false key presses.
- Try using the cooktop again after cleaning.
Technician Only Inspect and Replace Touch Control Module
- Disconnect power to the cooktop at the breaker.
- Remove the cooktop glass and access the touch control module.
- Check wiring harness connections between touch control and main control board.
- Replace touch control module if faulty.
- Reassemble and test cooktop operation.
Parts needed: Touch control module, Screws/fasteners as required, Connector harness
- If the F03 error persists after power reset and cleaning
- If the control panel remains unresponsive after basic troubleshooting
- If there are signs of electrical damage or burning smell
Next step
Choose the next step for F03
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Cooktop parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F03 error mean on KitchenAid cooktop?
F03 indicates a touch control module malfunction, leading to unresponsive controls and erratic temperature readings.
Can I fix KitchenAid cooktop F03 error myself?
Yes, you can perform a power reset and clean the touch control surface to attempt a fix.
How much does it cost to fix F03 error?
Repair costs range from $100 to $300, depending on the model and region.
When should I call a technician for F03?
Call a technician if the error persists after a reset and cleaning, or if the control panel remains unresponsive.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!