KitchenAid Coffee Maker Error ERR2
⚡ Quick Answer: The KitchenAid coffee maker ERR2 error signifies a malfunction in the brew cycle, often related to heating issues or faulty internal electrical compon... ✅ DIY Fixable
What Does Error ERR2 Mean?
The KitchenAid coffee maker ERR2 error signifies a malfunction in the brew cycle, often related to heating issues or faulty internal electrical components. Symptoms include the error display during brewing, a complete halt in the brewing process, and the coffee maker failing to heat water. This error can result from a dislocated electrical component or a malfunctioning heater, leading to extended brew cycle times. Addressing this issue promptly can help restore normal operation.
Common Symptoms:
- Error displayed during brew cycle
- Brewing stops and does not complete
- Coffee maker does not heat water
Possible Causes
- Internal electrical component dislocated or sensor fault (official for certain models) (high)
- Heater not functioning causing brew cycle time exceedance (official for other models) (high)
How to Fix Error ERR2
DIY Fix Basic reset and environment check
- Unplug the coffee maker for 5–10 minutes and then plug back in.
- Ensure the coffee maker is at normal room temperature before attempting to brew again.
- Check and fill the water reservoir and ensure it is seated properly if relevant to your model.
Technician Only Diagnostic inspection and repair
- Inspect internal heating element and temperature sensors for correct seating and connections.
- Check for dislocated components inside the unit that may be out of place.
- Verify heater functionality and that the heating cycle completes in expected time.
- Replace any faulty heater or sensor parts if confirmed defective.
Parts needed: Temperature sensor/thermistor, Heater element assembly, Internal wiring harness
- Internal fault persists after basic checks and reset
- Possible dislocated electrical component or heater failure indicated and unit under warranty
Next step
Choose the next step for ERR2
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Thermistor
Measures precise temperature changes and sends resistance feedback to the control board.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Coffee Maker parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 1000W |
|---|---|
| component | Brew Group Assembly |
| resistance | 5-15 ohms |
| part_number | KCM1202BG |
| voltage_rating | 120V AC |
Common Questions
What does ERR2 error mean on KitchenAid coffee maker?
ERR2 indicates a brewing malfunction, often related to heating or electrical faults.
Can I fix KitchenAid coffee maker ERR2 error myself?
Yes, try unplugging the coffee maker for 5-10 minutes, check the water reservoir, and ensure the unit is at room temperature.
How much does it cost to fix ERR2 error?
Estimated repair costs range from $50 to $200+, depending on parts and labor.
When should I call a technician for ERR2?
Call a technician if the error persists after basic checks, or if you suspect internal component failure.
Sources & References
Data last verified: 2026-07-26
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!