Kitchenaid Coffee Maker Error 4

⚡ Quick Answer: The KitchenAid coffee maker error code 4 indicates a malfunction during the brew cycle. This can manifest as the display showing '4' or 'Err4', an ina... ✅ DIY Fixable

What Does Error 4 Mean?

The KitchenAid coffee maker error code 4 indicates a malfunction during the brew cycle. This can manifest as the display showing '4' or 'Err4', an inability to start or complete brewing, and unresponsive buttons. Typically, this error arises from either a lack of water in the reservoir (dry boil) or a stuck button on the control panel. Ensuring proper water levels and checking for stuck buttons can often resolve the issue.

Common Symptoms:

  • Display shows ‘4’ or ‘Err4’ instead of time or normal status
  • Brewer will not start or complete a brew cycle
  • Buttons appear unresponsive (for stuck button scenario)
  • No water dispensing despite brewing attempt (for dry boil scenario)

Possible Causes

  • No water in the reservoir (Dry Boil) (high)
  • Stuck or jammed button on control panel (high)

How to Fix Error 4

DIY Fix Check water level and refill

  1. Turn off the coffee maker if it is running.
  2. Open the water reservoir and verify the water level.
  3. If the reservoir is empty or below the minimum line, fill it with fresh water.
  4. Attempt to resume the brewing cycle.

DIY Fix Free any stuck buttons

  1. Unplug the coffee maker from the power outlet.
  2. Firmly press and release each button on the control panel several times to free any that may be stuck.
  3. Plug the machine back into a grounded outlet.
  4. Attempt to start a brew cycle.

Technician Only Inspect for water path and sensor issues

  1. With the machine unplugged, check internal water lines for blockages.
  2. Inspect the water level sensor or float mechanism to ensure it registers correctly.
  3. Test continuity of any related sensors with appropriate tools.
  4. Replace sensors or clear blockages as identified.

Parts needed: Water level sensor / float, Internal tubing or water path components

Technician Only Service control panel if buttons remain unresponsive

  1. Disassemble the control panel after unplugging the appliance.
  2. Check ribbon cable connections and button contacts for wear or debris.
  3. Clean or replace the control panel board as needed.
  4. Reassemble and test the unit.

Parts needed: Control panel board, Button contacts / membrane

🛑 When to Call a Pro:
  • If error 4 persists after ensuring adequate water and freeing buttons
  • If internal sensors or control panel appear damaged or unresponsive

Technical Specifications

wattage 1000W
component Water Pump
resistance 10-20 ohms
part_number KCM1202PUMP
voltage_rating 120V AC

Common Questions

What does 4 error mean on kitchenaid coffee maker?

Error 4 indicates a brew cycle malfunction, often due to no water or a stuck button.

Can I fix kitchenaid coffee maker 4 error myself?

Yes, check the water level and free any stuck buttons to resolve the issue.

How much does it cost to fix 4 error?

Estimated repair costs range from $20 to $80 depending on the issue.

When should I call a technician for 4?

Call a technician if the error persists after checking water and buttons, or if sensors seem damaged.

Sources & References

Data last verified: 2026-03-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!