Kenmore Oven Error F30
⚡ Quick Answer: The Kenmore oven F30 error code signifies a malfunction in the temperature sensor circuit. This can lead to erratic temperature readings, causing the ... ✅ DIY Fixable
What Does Error F30 Mean?
The Kenmore oven F30 error code signifies a malfunction in the temperature sensor circuit. This can lead to erratic temperature readings, causing the oven to heat improperly or not at all. Potential causes include an open or failed temperature sensor, issues with the wiring harness, or a control board failure to detect the sensor circuit. Inspecting the temperature sensor and wiring can help identify the issue.
Common Symptoms:
- Oven displays F30 on the control panel
- Oven will not heat properly or stops heating
- Inaccurate or no temperature reading
Possible Causes
- Open or failed oven temperature sensor (RTD) (medium)
- Wiring harness issue between temperature sensor and control board (open/broken wiring or loose connector) (medium)
- Control board fails to detect proper sensor circuit (after verifying sensor and wiring) (low)
How to Fix Error F30
DIY Fix Basic checks and safety
- Power off the oven at the breaker and disconnect power
- Visually inspect the oven temperature sensor and wiring harness for visible damage or disconnected connectors
Technician Only Test and address sensor circuit fault
- Disconnect power and access the oven temperature sensor inside the oven cavity
- Use a multimeter to measure resistance of the sensor; expect ~1050–1100 ohms at room temperature
- If resistance is far from expected or open circuit, replace the oven temperature sensor
- Inspect and repair/replace wiring harness if broken, damaged, or loose
- After verifying sensor and wiring, if code persists, test or replace the control board
Parts needed: Oven temperature sensor (RTD), Wiring harness, Electronic control board
- If you are uncomfortable with electrical tests or opening the oven cabinet
- If diagnostic testing does not resolve the F30 error after sensor and wiring inspection
Next step
Choose the next step for F30
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Temperature Sensor |
| resistance | 1000-1100 ohms |
| part_number | W10619006 |
| voltage_rating | 120V AC |
Common Questions
What does F30 error mean on kenmore oven?
The F30 error indicates a malfunction in the temperature sensor circuit, leading to heating issues.
Can I fix kenmore oven F30 error myself?
Yes, you can perform basic checks like inspecting the temperature sensor and wiring for damage.
How much does it cost to fix F30 error?
Repair costs range from $40 to over $400 depending on parts and labor.
When should I call a technician for F30?
Call a technician if you're uncomfortable with electrical work or if the issue persists after basic checks.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!