Kenmore Oven Error F10
⚡ Quick Answer: The Kenmore oven error F10 indicates a runaway temperature issue, often caused by a faulty temperature sensor or wiring problems. This error leads to ... ✅ DIY Fixable
What Does Error F10 Mean?
The Kenmore oven error F10 indicates a runaway temperature issue, often caused by a faulty temperature sensor or wiring problems. This error leads to erratic temperature readings, overheating, and potential safety shutdowns, resulting in uneven cooking and difficulty maintaining the set temperature. Regular symptoms include the display of F10, beeping, and inconsistent cooking results.
Common Symptoms:
- Oven displays F10 and beeps
- Oven may overheat or shut down during bake/broil
- Temperature fluctuations or inability to maintain set temperature
- Possible uneven cooking or excessive heat inside oven
Possible Causes
- Faulty oven temperature sensor (medium)
- Wiring issues between sensor and control board (medium)
- Electronic control board malfunction (medium)
How to Fix Error F10
DIY Fix Basic reset and inspection
- Turn off oven and disconnect power (unplug or switch off breaker).
- Wait 1–5 minutes to allow control board to reset.
- Restore power and check if F10 persists.
- Visually inspect oven interior for obvious damage or excessive soot near elements.
Technician Only Diagnose and replace temperature sensor
- Disconnect power to oven.
- Access oven cavity and locate temperature sensor (usually rear wall).
- Disconnect sensor harness and test resistance with a multimeter at room temperature.
- Replace sensor if out of range.
- Reassemble and test oven for error clearance.
Parts needed: oven temperature sensor, multimeter for testing
Technician Only Inspect wiring and control board
- Disconnect power.
- Inspect and test wiring continuity between temperature sensor and control board.
- Examine control board for burnt components or stuck relays.
- Repair/replace wiring or control board as indicated by testing.
- Reassemble and verify proper operation.
Parts needed: wiring harness, electronic control board
- Error persists after basic diagnostics
- Burnt smells, visible electrical damage, or damaged components
- Uncomfortable performing electrical diagnostics
Next step
Choose the next step for F10
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Temperature Sensor |
| resistance | 1000-1100 ohms |
| part_number | WB21X5301 |
| voltage_rating | 120V AC |
Common Questions
What does F10 error mean on kenmore oven?
F10 indicates a runaway temperature problem, often due to a faulty temperature sensor or wiring issues.
Can I fix kenmore oven F10 error myself?
Yes, try a basic reset: turn off the oven, disconnect power, wait 1-5 minutes, then restore power.
How much does it cost to fix F10 error?
Repair costs for the F10 error range from $20 to $80 for parts, depending on the issue.
When should I call a technician for F10?
Call a technician if the error persists after a reset, or if you notice burnt smells or visible damage.
Sources & References
- How to Fix Kenmore Oven Error Code F10 (community)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!