Kenmore Oven Error F2
⚡ Quick Answer: The Kenmore oven error code F2 indicates a malfunction related to the temperature sensor, which may lead to erratic temperature readings or overheatin... ✅ DIY Fixable
What Does Error F2 Mean?
The Kenmore oven error code F2 indicates a malfunction related to the temperature sensor, which may lead to erratic temperature readings or overheating. This can cause the oven to shut off unexpectedly during bake or broil cycles. Common causes include a faulty temperature sensor, wiring issues in the sensor circuit, or an over-temperature condition detected by the control system.
Common Symptoms:
- Error code F2 displayed on oven control panel
- Oven may overheat or shut off during bake or broil
- Oven may be unresponsive or inaccurate in heating cycles
Possible Causes
- Faulty oven temperature sensor (medium)
- Wiring issue in temperature sensor circuit (medium)
- Over‑temperature condition/cycling problem (medium)
How to Fix Error F2
DIY Fix Basic Checks and Reset
- Turn off power to the oven (unplug or shut off circuit breaker).
- Wait 5–10 minutes and restore power to see if the code clears.
- Ensure oven vents are not blocked by racks or foil.
- Observe if the F2 code returns on next use.
Technician Only Inspect and Test Temperature Sensor and Wiring
- Disconnect power to oven.
- Access oven temperature sensor (typically inside the oven cavity rear).
- Measure sensor resistance with a multimeter.
- Inspect wiring harness and connectors for damage or high resistance.
- Replace the sensor if out of spec; repair wiring as needed.
- Reassemble and test oven heating cycles.
Parts needed: Oven temperature sensor, Wiring harness/connectors
- If F2 persists after sensor and wiring checks
- If control board issues are suspected (stuck relays, burned components)
- If user is uncomfortable working with electrical components
Next step
Choose the next step for F2
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Temperature Sensor |
| resistance | 1000-1100 ohms |
| part_number | W10603601 |
| voltage_rating | 120V AC |
Common Questions
What does F2 error mean on kenmore oven?
F2 indicates a malfunction with the temperature sensor, leading to overheating or inaccurate heating.
Can I fix kenmore oven F2 error myself?
Yes, you can try turning off the power for 5-10 minutes and check for blocked vents.
How much does it cost to fix F2 error?
Estimated repair cost is between $50 and $250 for parts, excluding labor.
When should I call a technician for F2?
Call a technician if the F2 error persists after checks or if you suspect control board issues.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!