Kenmore Microwave Error F2
⚡ Quick Answer: The Kenmore microwave F2 error indicates a malfunction in the thermistor or temperature sensor, causing the microwave to stop heating shortly after st... ⚠️ Difficulty Varies
What Does Error F2 Mean?
The Kenmore microwave F2 error indicates a malfunction in the thermistor or temperature sensor, causing the microwave to stop heating shortly after starting a cooking cycle. Symptoms include the display of the F2 error code and a lack of heat production. This issue is often accompanied by unusual buzzing sounds. A power reset may temporarily resolve the issue, but persistent F2 errors typically require inspection and possible replacement of the faulty thermistor or related components.
Common Symptoms:
- Microwave displays F2 during or immediately after starting a cooking cycle
- Microwave may stop heating shortly after starting
- No heat produced while F2 is displayed
Possible Causes
- Thermistor/Temperature sensor shorted or failed (medium)
How to Fix Error F2
DIY Fix Power reset and symptom check
- Unplug the microwave from the power outlet.
- Wait 1–2 minutes.
- Plug the microwave back in and try a short heating cycle.
- See if F2 returns.
Technician Only Inspect & test temperature sensing circuit
- Disconnect power and remove microwave outer cabinet.
- Locate the cavity thermistor/temperature sensor.
- Inspect wiring harness for damage or loose connectors.
- Use a multimeter to measure thermistor resistance against specification; a shorted reading suggests failure.
- Replace thermistor/temperature sensor if faulty.
Parts needed: Thermistor / temperature sensor, Wiring harness (if damaged)
- If the microwave displays F2 consistently after reset and basic checks
- If multimeter testing shows unexpected readings in the thermistor circuit
- If internal inspection reveals damaged wiring
- If you are not comfortable working around high‑voltage microwave components
Next step
Choose the next step for F2
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Thermistor
Measures precise temperature changes and sends resistance feedback to the control board.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Microwave parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F2 error mean on Kenmore microwave?
The F2 error indicates a problem with the thermistor, causing the microwave to stop heating shortly after starting.
Can I fix Kenmore microwave F2 error myself?
Yes, you can try resetting the microwave by unplugging it for 1-2 minutes, then testing it again.
How much does it cost to fix F2 error?
The cost to replace the sensor part ranges from $15 to $80, depending on the model, plus technician labor.
When should I call a technician for F2?
Call a technician if the F2 error persists after a reset, or if you notice damaged wiring or are uncomfortable with repairs.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!