Kenmore Dryer Error PF
⚡ Quick Answer: The Kenmore dryer PF error code indicates a power failure during the drying cycle, causing the dryer to stop or fail to start. This error is triggered... ✅ DIY Fixable
What Does Error PF Mean?
The Kenmore dryer PF error code indicates a power failure during the drying cycle, causing the dryer to stop or fail to start. This error is triggered by an interruption in the electrical supply, which could be due to a tripped circuit breaker or unstable connections. Resetting the dryer may resolve the issue temporarily, but persistent problems may require further inspection.
Common Symptoms:
- PF code displayed on control panel
- Dryer cycle stops mid‑cycle or won’t start after interruption
- Dryer resumes normally after power reset
Possible Causes
- Power interruption during cycle (high)
- Unstable electrical supply or loose connections (medium)
How to Fix Error PF
DIY Fix Clear the PF code and restart dryer
- Press the Stop or Start button to clear the PF code display
- If drying was interrupted, restart the cycle
DIY Fix Check household power and connections
- Verify circuit breaker hasn’t tripped and reset if necessary
- Inspect power cord and outlet for secure fit and visible damage
- Avoid using extension cords or overloaded circuits
Technician Only Inspect and correct electrical supply issues
- Measure voltage at outlet to ensure proper and stable supply
- Check and tighten internal and external wiring connections
- Replace damaged power cord or outlet if found faulty
Parts needed: Multimeter, Replacement power cord, Outlet receptacle (if needed)
- PF code persists after power supply verification and reset
- Frequent breaker trips or signs of electrical damage
- Dryer fails to operate normally after corrective steps
Next step
Choose the next step for PF
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Power Cord
Supplies mains power to the appliance and includes the model-specific plug and terminal connection.
- Typical part-only price
- $15 - $70
- DIY difficulty
- Medium
- Estimated time
- 20-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 5000W |
|---|---|
| component | Control Board |
| resistance | 10-30 ohms |
| part_number | W10110641 |
| voltage_rating | 240V AC |
Common Questions
What does PF error mean on kenmore dryer?
The PF error indicates a power failure, causing the dryer to stop mid-cycle or not start.
Can I fix kenmore dryer PF error myself?
Yes, you can clear the PF code by pressing the Stop or Start button and checking your household power supply.
How much does it cost to fix PF error?
The estimated repair cost for the PF error ranges from $50 to $200.
When should I call a technician for PF?
Call a technician if the PF code persists after checking the power supply or if there are signs of electrical damage.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!