Kenmore Dryer Error F28

⚡ Quick Answer: The Kenmore Dryer F28 error indicates a malfunction related to the moisture sensor, often leading to the dryer failing to start or stopping mid-cycle.... ✅ DIY Fixable

What Does Error F28 Mean?

The Kenmore Dryer F28 error indicates a malfunction related to the moisture sensor, often leading to the dryer failing to start or stopping mid-cycle. This issue may arise from an open circuit or a malfunctioning moisture sensor, which can send incorrect moisture signals. To address this, ensure that the moisture sensor is clean and that its wiring is securely connected and undamaged.

Common Symptoms:

  • Error F28 displayed on control panel
  • Dryer may not start or may stop mid-cycle
  • Sensor may detect abnormal moisture signal or open circuit

Possible Causes

  • Moisture sensor open or malfunction (high)
  • Loose or damaged moisture sensor wiring/harness (medium)

How to Fix Error F28

DIY Fix Basic moisture sensor check

  1. Unplug the dryer from power.
  2. Visually inspect moisture sensor bars inside the drum for residue; clean with rubbing alcohol and soft cloth.
  3. Check that wiring harness to the sensor is connected and not visibly damaged.

Technician Only Test and replace moisture sensor or wiring

  1. Disconnect power to the dryer.
  2. Access moisture sensor and associated wiring harness.
  3. Use multimeter to test continuity of sensor bars and harness connections.
  4. Replace moisture sensor or wiring harness if open or out of spec.
  5. Reassemble and test dryer operation.

Parts needed: Moisture sensor bars, Moisture sensor wiring harness

🛑 When to Call a Pro:
  • If moisture sensor wiring is embedded or not user-serviceable and you are unsure how to safely access it
  • If error persists after sensor and wiring replacement

Technical Specifications

wattage 5000W
component Motor Control Board
resistance 10-30 ohms
part_number W10812395
voltage_rating 240V AC

Common Questions

What does F28 error mean on Kenmore Dryer?

F28 indicates a moisture sensor malfunction, causing the dryer to not start or stop unexpectedly.

Can I fix Kenmore Dryer F28 error myself?

Yes, you can check the moisture sensor for residue and inspect the wiring for damage.

How much does it cost to fix F28 error?

Repair costs for the F28 error typically range from $20 to $100.

When should I call a technician for F28?

Call a technician if the moisture sensor wiring is embedded or if the error persists after replacement.

Data last verified: 2026-02-19

User Comments (0)

Share your experience or solution below.

Be the first to comment!