Kenmore Dryer Error F25

⚡ Quick Answer: The Kenmore Dryer F25 error indicates a malfunction in the inlet thermistor, which can lead to the dryer not starting or heating properly. This error ... ✅ DIY Fixable

What Does Error F25 Mean?

The Kenmore Dryer F25 error indicates a malfunction in the inlet thermistor, which can lead to the dryer not starting or heating properly. This error occurs when the control board detects an electrically shorted inlet temperature sensor. If you see this error code, it’s advisable to check the dryer’s lint filter and exhaust vent for blockages, ensure the door is fully closed, and consider inspecting the thermistor for faults.

Common Symptoms:

  • Dryer may not start or stops mid‑cycle
  • Dryer may not heat properly
  • Error code F25 displayed on control panel

Possible Causes

  • Shorted inlet thermistor (temperature sensor) (high)

How to Fix Error F25

DIY Fix Basic checks for F25 error on Kenmore dryer

  1. Unplug the dryer from power.
  2. Inspect lint filter and exhaust vent for blockage; clear any lint build‑up.
  3. Ensure dryer door is fully closed and latched when attempting a cycle.
  4. Plug the dryer back in and attempt to restart to see if code persists.

Technician Only Test and replace inlet thermistor

  1. Disconnect power to the dryer.
  2. Access the inlet thermistor near the heating element.
  3. Use a multimeter to measure resistance — ~50,000 ohms at room temperature is typical; a much lower reading indicates a short.
  4. If thermistor reading is out of spec, replace the thermistor.
  5. Reassemble and test dryer operation.

Parts needed: Inlet thermistor, High‑limit thermostat (if integrated)

🛑 When to Call a Pro:
  • If thermistor tests normal but code persists, or if you are not comfortable performing electrical diagnostics or accessing internal dryer components

Technical Specifications

wattage N/A
component Thermistor
resistance 10-15 kΩ
part_number WPW10150130
voltage_rating 120V AC

Common Questions

What does F25 error mean on Kenmore Dryer?

F25 indicates a shorted inlet thermistor, causing the dryer not to start or heat.

Can I fix Kenmore Dryer F25 error myself?

Yes, you can perform basic checks like inspecting the lint filter and ensuring the door is latched.

How much does it cost to fix F25 error?

Repair costs range from $30 to $120 for parts, plus labor.

When should I call a technician for F25?

Call a technician if the thermistor tests normal but the error persists or if you're uncomfortable with electrical diagnostics.

Data last verified: 2026-02-19

User Comments (0)

Share your experience or solution below.

Be the first to comment!