Kenmore Dryer Error F24
⚡ Quick Answer: The Kenmore Dryer F24 error code indicates a malfunction in the inlet temperature sensor, also known as the inlet thermistor. This issue leads to erra... ✅ DIY Fixable
What Does Error F24 Mean?
The Kenmore Dryer F24 error code indicates a malfunction in the inlet temperature sensor, also known as the inlet thermistor. This issue leads to erratic temperature readings and can cause the dryer to stop cycles prematurely or fail to heat effectively. It is essential to diagnose the thermistor as it may be an open circuit detected by the dryer’s control system.
Common Symptoms:
- Dryer may not heat
- Cycle may stop prematurely
- Error code displayed on control panel
Possible Causes
- Open or faulty inlet thermistor (temperature sensor) (high)
How to Fix Error F24
DIY Fix Basic checks before repair
- Disconnect the dryer from power to ensure safety.
- Check that the dryer vent and lint filter are clear to ensure airflow isn’t affecting operation.
Technician Only Test and replace inlet thermistor
- Disconnect power to the dryer.
- Access the inlet thermistor location (often integrated with the high-limit thermostat).
- Use a multimeter to measure resistance; at room temperature, proper resistance should be around ~50,000 ohms.
- If open or out of expected range, replace the inlet thermistor (or combined part as applicable).
- Reassemble and test dryer operation.
Parts needed: Inlet thermistor (temperature sensor), High-limit thermostat (if combined)
- If thermistor replacement does not clear the error code after proper diagnosis.
- If wiring harness or control board issues are suspected beyond simple component replacement.
Next step
Choose the next step for F24
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Thermostat
Regulates temperature by turning the heating or cooling system on or off.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F24 error mean on Kenmore Dryer?
The F24 error indicates a fault with the inlet temperature sensor, causing inconsistent heating and cycle stoppage.
Can I fix Kenmore Dryer F24 error myself?
Yes, you can check power, clear the vent and lint filter, and ensure safety before attempting repairs.
How much does it cost to fix F24 error?
Repair costs for F24 error typically range from $20 to $80 for parts, with additional technician labor fees.
When should I call a technician for F24?
Call a technician if the error persists after replacing the thermistor or if wiring or control board issues are suspected.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!