Kelvinator Washing Machine Error E20
⚡ Quick Answer: The Kelvinator washing machine error code E20 indicates a drainage issue, typically arising from blockages in the drainage system. Symptoms include th... ✅ DIY Fixable
What Does Error E20 Mean?
The Kelvinator washing machine error code E20 indicates a drainage issue, typically arising from blockages in the drainage system. Symptoms include the machine stopping mid-cycle, water remaining in the drum after the cycle, and unusual sounds during the drain cycle. This error often points to a clogged drain filter or hose, preventing proper water flow.
Common Symptoms:
- Washing cycle stops mid‑cycle with E20 displayed (water not drained).
- Water remains in the drum after cycle completion.
- Unusual sounds during attempted drain cycle.
Possible Causes
- Clogged or blocked drainage filter or pump area (medium)
- Kinked, pinched, or improperly positioned drain hose preventing proper water flow (medium)
- Blockage further downstream in the drain system (house plumbing) (low)
How to Fix Error E20
DIY Fix Check and clear drain filter
- Turn off and unplug the washing machine.
- Locate the drain/filter access (usually at the bottom front behind an access panel).
- Place a shallow tray or towels to catch water.
- Open the filter cap and remove any lint, debris, or objects blocking flow.
- Reinstall the filter and close the panel.
DIY Fix Inspect drain hose
- Unplug the washer and pull it away from the wall.
- Check the entire drain hose for kinks, sharp bends, or pinches.
- Ensure the hose height and positioning are correct per your installation manual (typically not too low or deeply inserted).
- Straighten or reposition the hose, and ensure it is securely connected.
Technician Only Professional drain system diagnosis
- Inspect internal drain pump for mechanical failure.
- Test drain pump electrical operation and continuity.
- Verify proper drain hose clearance and measure drain height relative to spec.
- Check external drain plumbing for obstructions.
Parts needed: drain pump, drain hose, clamps and seals
- If water remains after clearing filters and hoses and the machine still displays E20.
- If unusual noises (grinding, humming) are heard during drain attempts.
- If the drain pump appears faulty or fails electrical testing.
Next step
Choose the next step for E20
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E20 error mean on Kelvinator washing machine?
E20 indicates a drainage issue, with symptoms like water remaining in the drum and unusual sounds during the drain cycle.
Can I fix Kelvinator washing machine E20 error myself?
Yes, you can check and clear the drain filter and inspect the drain hose for kinks or blockages.
How much does it cost to fix E20 error?
Repair costs range from ¥5,000 to ¥25,000, depending on necessary part replacements and labor.
When should I call a technician for E20?
Call a technician if water remains after clearing filters, if unusual noises persist, or if the drain pump appears faulty.
Sources & References
- E20 Washing Machine Error: A Complete Guide (community)
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!