Kelvinator Dishwasher Error E8
⚡ Quick Answer: The E8 error code on a Kelvinator dishwasher signals a potential issue with the drain pump or drainage system. This may result in the dishwasher stopp... ✅ DIY Fixable
What Does Error E8 Mean?
The E8 error code on a Kelvinator dishwasher signals a potential issue with the drain pump or drainage system. This may result in the dishwasher stopping mid-cycle, failure to start or resume, and possible water accumulation. Common causes include drainage blockages or sensor malfunctions that prevent proper water flow. If you notice unusual noises during operation or the machine fails to drain, addressing these issues promptly is essential to restore functionality.
Common Symptoms:
- Dishwasher stops mid‑cycle and displays E8
- Machine may not start or resume cycle after error
- Possible water accumulation or improper drainage
Possible Causes
- Drain Pump
- Blocked Drain Hose
- Faulty Control Board
How to Fix Error E8
DIY Fix Basic checks for water flow and drainage
- Turn off and unplug the dishwasher power.
- Remove and clean the dishwasher filter to eliminate food debris.
- Check the drain hose for kinks, bends, or blockages.
- Ensure the float switch (if present) can move freely and is not stuck.
Technician Only Inspect drainage and internal sensors/components
- Inspect the drain pump and pump motor for blockages, obstructions, or failure.
- Test water level and flow sensors for proper operation and wiring continuity.
- Check internal wiring harnesses for corrosion or wear.
- Evaluate control board error logs or consult the specific model service manual if available.
Parts needed: Drain pump assembly, Float switch/water level sensor, Wiring harness, Control board
- If the error returns after basic cleaning and checks
- If water is found pooling inside or leaking
- If internal components (pump, sensors) are suspected to be faulty
Next step
Choose the next step for E8
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Float Switch
Detects the maximum water level to prevent overflow and potential flooding.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E8 error mean on Kelvinator dishwasher?
The E8 error indicates a malfunction in the drain pump, often causing the dishwasher to stop mid-cycle.
Can I fix Kelvinator dishwasher E8 error myself?
Yes, you can perform basic checks like cleaning the filter and checking the drain hose for blockages.
How much does it cost to fix E8 error?
Repair costs typically range from $100 to $300 for service calls, plus additional parts if needed.
When should I call a technician for E8?
Call a technician if the error persists after cleaning, if you find water pooling, or suspect faulty internal components.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!