Kelvinator Dishwasher Error E2
⚡ Quick Answer: The Kelvinator dishwasher E2 error indicates a drainage issue, often due to a clogged or malfunctioning drain pump. Users may notice the error code di... ✅ DIY Fixable
What Does Error E2 Mean?
The Kelvinator dishwasher E2 error indicates a drainage issue, often due to a clogged or malfunctioning drain pump. Users may notice the error code displayed during or after a cycle, standing water at the bottom, or the dishwasher unexpectedly stopping mid-cycle. It's essential to inspect the drain hose and pump for blockages or defects to resolve this issue effectively.
Common Symptoms:
- Dishwasher displays E2 during or after cycle
- Standing water remains at bottom of dishwasher
- Dishwasher stops mid‑cycle without completing wash
Possible Causes
- Clogged or blocked drain hose (medium)
- Malfunctioning drain pump (medium)
How to Fix Error E2
DIY Fix Basic Drainage Checks
- Turn off and unplug the dishwasher.
- Check the bottom of the dishwasher for standing water.
- Inspect and clean the dishwasher’s internal filter (bottom basket).
- Ensure the drain hose is not kinked, bent, or visibly blocked.
Technician Only Drain Pump and Hose Service
- Pull the dishwasher from under the counter to access the back drain hose.
- Disconnect the drain hose and test/clean it to remove blockages.
- Access and test the drain pump for proper operation; clear debris or replace the pump if faulty.
- Reassemble connections ensuring no kinks and secure fittings.
Parts needed: Drain pump, Drain hose
- If drainage checks and cleaning do not clear the E2 error.
- If the drain pump hums but fails to move water, indicating internal failure.
- If there is water leakage or unusual noises during pump operation.
Next step
Choose the next step for E2
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 60W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | Kelvinator 5304501234 |
| voltage_rating | 120V AC |
Common Questions
What does E2 error mean on Kelvinator dishwasher?
E2 error signifies a drainage malfunction, often due to a clogged drain hose or a failing drain pump.
Can I fix Kelvinator dishwasher E2 error myself?
Yes, you can check for clogs in the drain hose and clean the internal filter to resolve the E2 error.
How much does it cost to fix E2 error?
$80–$250+ depending on the necessary parts and labor for repair.
When should I call a technician for E2?
Call a technician if basic checks do not resolve the issue or if the pump is humming but not moving water.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!