Kelvinator Dishwasher Error E6

⚡ Quick Answer: The Kelvinator dishwasher E6 error indicates a possible malfunction related to water overflow detection or excessive water levels. This error may caus... ✅ DIY Fixable

What Does Error E6 Mean?

The Kelvinator dishwasher E6 error indicates a possible malfunction related to water overflow detection or excessive water levels. This error may cause the wash cycle to stop unexpectedly, and you may hear unusual noises during operation. To troubleshoot, start with basic checks such as ensuring the door is securely closed and inspecting for any visible leaks or water accumulation around the appliance.

Common Symptoms:

  • Dishwasher displays error code E6/E06 on control panel
  • Wash cycle stops mid‑cycle or does not proceed

Possible Causes

  • Drain pump assembly

How to Fix Error E6

DIY Fix Basic visual checks and reset

  1. Turn off and unplug the dishwasher or switch off its circuit breaker.
  2. Check for obvious water overflow, leakage, or puddling around the base.
  3. Ensure the dishwasher door is fully closed and latched securely.
  4. Wait 5–10 minutes, then restore power and restart a normal cycle.

Technician Only Inspect water level/overflow sensor and associated wiring

  1. Verify model‑specific error code definitions via service manual if available.
  2. Check the overflow detection sensor or float switch for proper operation.
  3. Inspect and test water level sensors and wiring harness for faults or shorts.
  4. Confirm no excessive water leakage into the base pan or tray.
  5. Use diagnostic tools to read live sensor values and control board error logs.

Parts needed: Overflow sensor/float assembly, Water level sensor or pressure switch, Control board harness and connectors

🛑 When to Call a Pro:
  • If error persists after basic reset and inspection
  • If visible leakage or overflow is occurring
  • If check reveals water in the base pan or activation of the anti‑flood mechanism

Technical Specifications

wattage 50W
component Drain Pump Assembly
resistance 10-30 ohms
part_number KDFE104HSS-PUMP
voltage_rating 120V AC

Common Questions

What does E6 error mean on Kelvinator dishwasher?

E6 indicates a possible water overflow or excessive water level, causing the wash cycle to stop.

Can I fix Kelvinator dishwasher E6 error myself?

Yes, try turning off the dishwasher, checking for leaks, and ensuring the door is closed.

How much does it cost to fix E6 error?

Estimated repair costs range from $100 to $300, including labor and parts.

When should I call a technician for E6?

Call a technician if the error persists after basic checks or if you notice visible leaks.

Data last verified: 2026-03-18

User Comments (0)

Share your experience or solution below.

Be the first to comment!