Kelvinator Dishwasher Error E18

⚡ Quick Answer: The Kelvinator Dishwasher E18 error indicates a potential drain pump failure. This may be accompanied by unusual noises and the dishwasher stopping mi... ✅ DIY Fixable

What Does Error E18 Mean?

The Kelvinator Dishwasher E18 error indicates a potential drain pump failure. This may be accompanied by unusual noises and the dishwasher stopping mid-cycle. It's crucial to check the water supply, inspect hoses for kinks, and verify that the inlet valve is functioning properly to resolve this issue.

Common Symptoms:

  • Error code E18 appears on dishwasher display
  • Dishwasher stops mid‑cycle

Possible Causes

  • Drain Pump
  • Blocked Drain Hose
  • Faulty Control Board

How to Fix Error E18

DIY Fix Check water supply and hoses

  1. Ensure the main water supply to the dishwasher is turned on.
  2. Inspect the inlet hose for kinks or bends that could restrict flow.
  3. Verify that the hose connectors are tight and not leaking.

DIY Fix Verify water flow into dishwasher

  1. Run water at sink where dishwasher connects to ensure adequate pressure.
  2. Check if other appliances receive water normally.
  3. Try running a short cycle to see if error persists when water pressure is stable.

Technician Only Inspect internal water inlet components

  1. Check the water inlet valve for blockage or malfunction.
  2. Test for adequate water flow rate entering the machine.
  3. Replace inlet valve if defective.

Parts needed: inlet valve, hoses, connectors

🛑 When to Call a Pro:
  • If error code persists after checking water supply, pressure, and hoses
  • If water inlet valve or internal components appear damaged or fail testing

Technical Specifications

wattage 50W
component Drain Pump
resistance 10-20 ohms
part_number Kelvinator 5304502025
voltage_rating 120V AC

Common Questions

What does E18 error mean on Kelvinator Dishwasher?

E18 indicates a potential drain pump failure, stopping the dishwasher mid-cycle.

Can I fix Kelvinator Dishwasher E18 error myself?

Yes, check the water supply, hoses for kinks, and ensure proper water flow.

How much does it cost to fix E18 error?

Estimated repair costs range from $50 to $150 depending on the parts needed.

When should I call a technician for E18?

Call a technician if the error persists after checking the water supply and internal components.

Data last verified: 2026-03-18

User Comments (0)

Share your experience or solution below.

Be the first to comment!