Kelvinator Dishwasher Error E17

⚡ Quick Answer: The Kelvinator Dishwasher E17 error indicates a problem with the water inlet valve, leading to inadequate filling of the dishwasher. This could stem f... ✅ DIY Fixable

What Does Error E17 Mean?

The Kelvinator Dishwasher E17 error indicates a problem with the water inlet valve, leading to inadequate filling of the dishwasher. This could stem from issues with the water supply or a malfunctioning sensor. To address this, check that the water supply valve is fully open, the inlet hose is clear of kinks or blockages, and perform a reset by disconnecting the power for a few minutes.

Possible Causes

  • Water Inlet Valve
  • Clogged Water Supply Line
  • Faulty Control Board

How to Fix Error E17

DIY Fix Check Basic Water Flow and Reset Dishwasher

  1. Ensure the dishwasher’s water supply valve is fully open.
  2. Inspect the inlet hose to confirm it is not kinked, bent, or blocked.
  3. Turn off and disconnect power to the dishwasher for a few minutes and reconnect to attempt clearing temporary faults.
  4. Check any internal filters (inlet filter or screens) and clean if debris is present.

Technician Only Professional Inspection for Water Supply and Sensor Faults

  1. Verify water pressure to the dishwasher and check supply line integrity.
  2. Test water inlet valve and sensors for proper operation.
  3. Scan dishwasher control board for fault history with a service tool, if available.
  4. Inspect for potential internal leaks or issues that may trigger electronic alarms.

Parts needed: Water inlet valve, Water supply hose, Control board diagnostic tools

🛑 When to Call a Pro:
  • If the error persists after basic water supply and hose checks.
  • If there are signs of water leakage, electrical smell, or other abnormal behavior.

Technical Specifications

wattage 10W
component Water Inlet Valve
resistance 1,000-1,500 ohms
part_number Kelvinator 5304502026
voltage_rating 120V AC

Common Questions

What does E17 error mean on Kelvinator Dishwasher?

E17 error indicates a problem with the water inlet valve, causing filling issues.

Can I fix Kelvinator Dishwasher E17 error myself?

Yes, check the water supply and hose connections, then reset the dishwasher.

How much does it cost to fix E17 error?

Repair costs range from $100 to $300+, depending on diagnosis and parts needed.

When should I call a technician for E17?

Call a technician if the error persists after checking the water supply and hose.

Data last verified: 2026-03-18

User Comments (0)

Share your experience or solution below.

Be the first to comment!