Kelvinator Dishwasher Error E16
⚡ Quick Answer: The Kelvinator Dishwasher E16 error code indicates a potential issue with the drain pump, often resulting in unusual noises and a failure to drain wat... ✅ DIY Fixable
What Does Error E16 Mean?
The Kelvinator Dishwasher E16 error code indicates a potential issue with the drain pump, often resulting in unusual noises and a failure to drain water. Users may find that the error clears after power cycling the unit. Regular maintenance, such as cleaning the filter and ensuring hoses are not kinked, can help prevent this issue.
Common Symptoms:
- Dishwasher displays E16 and stops operation
- Error may clear after power cycling in some reports
Possible Causes
- Drain pump blockage
- Faulty drain pump
- Clogged drain hose
How to Fix Error E16
DIY Fix Basic checks and reset
- Turn off the dishwasher and cut power at the outlet or breaker.
- Check that the water supply valve to the dishwasher is fully open and hoses are not kinked.
- Clean the dishwasher filter and drain area to remove debris.
- Restore power and attempt a normal cycle to see if the error recurs.
Technician Only Inspect water inlet and control components
- Check the water inlet valve/solenoid for correct operation and signs of being stuck open or faulty.
- Inspect wiring and connections related to water fill and control sensors.
- Use diagnostic tools to test sensors and valve operation under load.
Parts needed: Water inlet valve / solenoid, Related wiring harness, Control board/sensors (if applicable)
- If water continues to enter the dishwasher when the unit is turned off or unplugged
- If the error persists after basic checks and resetting
- If you are uncomfortable performing electrical or internal inspections
Next step
Choose the next step for E16
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | Kelvinator 5304511725 |
| voltage_rating | 120V AC |
Common Questions
What does E16 error mean on Kelvinator Dishwasher?
E16 indicates a drain pump issue, causing unusual noises and drainage failure.
Can I fix Kelvinator Dishwasher E16 error myself?
Yes, you can perform basic checks like cleaning the filter and ensuring proper water supply.
How much does it cost to fix E16 error?
Estimated repair costs range from ¥10,000 to ¥30,000, depending on parts and region.
When should I call a technician for E16?
Call a technician if water continues to enter the dishwasher when off or if the error persists after basic checks.
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!