Kelvinator Dishwasher Error E10

⚡ Quick Answer: The Kelvinator dishwasher error E10 signifies a potential malfunction in the drain pump, which may result in the dishwasher not progressing past the i... ✅ DIY Fixable

What Does Error E10 Mean?

The Kelvinator dishwasher error E10 signifies a potential malfunction in the drain pump, which may result in the dishwasher not progressing past the initial cycle phase. Users might notice unusual noises or the machine failing to drain water adequately. To address this issue, check that the dishwasher door is securely latched, ensure the water supply valve is fully open, and inspect the water inlet hose for any kinks or blockages. If these steps do not resolve the E10 error, further investigation may be necessary.

Common Symptoms:

  • Dishwasher stops functioning and displays E10
  • Cycle does not proceed past initial phase

Possible Causes

  • Drain Pump
  • Blocked Drain Hose
  • Faulty Control Board

How to Fix Error E10

DIY Fix Check general water supply and basic reset

  1. Ensure the dishwasher door is fully closed and latched properly.
  2. Check that the household water supply valve feeding the dishwasher is fully open.
  3. Inspect the water inlet hose for kinks, blockages, or bends.
  4. Turn off power to the dishwasher at the breaker or unplug it, wait 5–10 minutes, and restore power to see if the code clears.
🛑 When to Call a Pro:
  • If the E10 error persists after basic user checks and reset attempts.
  • If there is visible leakage, abnormal noises, or repeated failures to fill with water.

Next step

Choose the next step for E10

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Drain Pump

Pumps waste water out of the appliance during the drain cycle.

Typical part-only price
$35 - $80
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Also check
RepairClinic

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Drain Hose

Carries waste water from the drain pump to your home's standpipe or sink drain.

$15 - $30 · Easy · 15-30 mins

Check fit & price
Model number required

Model-compatible Dishwasher parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dishwasher Cleaner and Descaler

Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.

View maintenance supply
Maintenance supply

Braided Dishwasher Inlet Hose

For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

wattage 50W
component Drain Pump
resistance 10-20 ohms
part_number Kelvinator 5304511238
voltage_rating 120V AC

Common Questions

What does E10 error mean on Kelvinator dishwasher?

E10 error indicates a drain pump malfunction, causing the dishwasher to stop functioning and not proceed with the cycle.

Can I fix Kelvinator dishwasher E10 error myself?

Yes, check the water supply, ensure the door is latched, and inspect the inlet hose for blockages.

How much does it cost to fix E10 error?

Repair costs for E10 error vary by model and region; it's best to consult a local technician.

When should I call a technician for E10?

Call a technician if the E10 error persists after user checks, or if you notice leakage or other abnormal noises.

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!