Kelvinator Dishwasher Error E08
⚡ Quick Answer: The Kelvinator Dishwasher E08 error indicates a malfunction in the turbidity sensor, responsible for detecting water cleanliness. This issue may cause... ✅ DIY Fixable
What Does Error E08 Mean?
The Kelvinator Dishwasher E08 error indicates a malfunction in the turbidity sensor, responsible for detecting water cleanliness. This issue may cause the dishwasher to stop mid-cycle, resulting in poor wash performance and unusual noises. The dishwasher may require a reset to continue functioning properly.
Common Symptoms:
- Dishwasher stops during cycle with error E08 displayed
- Possible poor wash performance (if associated with turbidity reporting malfunction)
- Dishwasher may halt and require reset
Possible Causes
- Turbidity sensor (water cleanliness sensor) malfunction or unexpected readings (medium)
How to Fix Error E08
DIY Fix Basic checks and reset
- Turn off and disconnect power to the dishwasher for at least 5 minutes to reset the control board.
- Inspect the dishwasher interior: ensure filters are clean and not obstructing water movement.
- Check that dishes and utensils are loaded properly so they do not block sensors or spray arms.
Technician Only Inspect and repair/request professional diagnostics
- Access and test the turbidity sensor for correct operation using a multimeter or advanced diagnostic tools.
- Verify wiring continuity from the turbidity sensor to the control board and inspect for corrosion or damage.
- Replace the turbidity sensor if found faulty or recalibrate if supported by the specific model’s service manual.
Parts needed: Turbidity sensor / water clarity sensor, Control board connectors if damaged
- If the error persists after power cycling and basic filter cleanup, or if you are uncomfortable accessing internal sensors or electronics.
- If repeated sensor/motor diagnostics indicate wiring harness issues or ambiguous results.
Next step
Choose the next step for E08
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
- Typical part-only price
- $20 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E08 error mean on Kelvinator Dishwasher?
E08 signifies a turbidity sensor malfunction, causing the dishwasher to stop mid-cycle.
Can I fix Kelvinator Dishwasher E08 error myself?
Yes, try resetting the dishwasher, cleaning filters, and ensuring proper dish loading.
How much does it cost to fix E08 error?
Repair costs for the E08 error typically range from $80 to $250, depending on parts and labor.
When should I call a technician for E08?
Call a technician if the error persists after basic troubleshooting or if you're uncomfortable accessing internal components.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!