Kelvinator Dishwasher Error E07
⚡ Quick Answer: The Kelvinator Dishwasher error E07 indicates a potential malfunction in the drain pump, often resulting in unusual sounds during operation and failur... ✅ DIY Fixable
What Does Error E07 Mean?
The Kelvinator Dishwasher error E07 indicates a potential malfunction in the drain pump, often resulting in unusual sounds during operation and failure to drain water effectively. If you encounter this error, it may be due to blockages or issues with the pump itself.
Possible Causes
- Drain pump blockage
- Faulty drain pump
- Electrical connection issue
How to Fix Error E07
DIY Fix Basic visual checks and user‑level resets
- Turn off and unplug the dishwasher from the electrical supply.
- Check that the door is fully closed and latched correctly.
- Inspect for any visible blockages around the detergent dispenser and filter areas.
- Clean the bottom filter and any visible debris inside the tub.
- Restore power and try starting a new cycle to see whether the error persists.
- If the error persists after basic checks and resetting the dishwasher.
- If you observe water leaks from the dishwasher base or unusual noises during operation.
- If the dishwasher fails to complete cycles or displays other fault indicators alongside E07.
Next step
Choose the next step for E07
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-30 ohms |
| part_number | KDTM-PUMP-001 |
| voltage_rating | 120V AC |
Common Questions
What does E07 error mean on Kelvinator Dishwasher?
E07 error indicates a malfunction in the drain pump, leading to drainage issues.
Can I fix Kelvinator Dishwasher E07 error myself?
Yes, you can perform basic checks like ensuring the door is latched and inspecting for blockages.
How much does it cost to fix E07 error?
Repair costs vary by model and region; consult a local technician for an estimate.
When should I call a technician for E07?
Call a technician if the error persists after checks or if you notice leaks or unusual noises.
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!