Kelvinator Dishwasher Error E02
⚡ Quick Answer: The Kelvinator dishwasher E02 error indicates a drainage malfunction, often characterized by water not draining at the end of the cycle, standing wate... ✅ DIY Fixable
What Does Error E02 Mean?
The Kelvinator dishwasher E02 error indicates a drainage malfunction, often characterized by water not draining at the end of the cycle, standing water in the sump, and unusual noises from the drain pump. This issue typically arises from a clogged drain system or a faulty drain pump, leading to incomplete cycles and inefficient operation.
Common Symptoms:
- Water not draining at end of cycle
- Standing water in dishwasher sump
- Cycle stops or does not progress due to water not being evacuated
Possible Causes
- Clogged drain system (filter, hose, or drain path) (medium)
- Faulty or obstructed drain pump (medium)
How to Fix Error E02
DIY Fix Check and clear blockages in filter and drain hose
- Turn off and disconnect power to the dishwasher.
- Remove the bottom dish rack to access the filter assembly.
- Remove and rinse the dishwasher filter under warm water to clear debris.
- Inspect the drain hose for kinks or visible blockages; clear if present.
- Reassemble and test run the dishwasher.
Technician Only Inspect and service the drain pump and internal drain components
- Disconnect power and water supply.
- Access the dishwasher base panel to reach the drain pump.
- Inspect the pump for obstructions or mechanical failure.
- Test the pump electrically and replace if faulty.
- Verify all internal drain paths are clear and reassemble.
Parts needed: Drain pump assembly, Drain hose (if damaged)
- If after clearing accessible blockages the error persists.
- If the drain pump is suspected to be mechanically or electrically faulty.
- If there are signs of internal leaks or water damage within the dishwasher base.
Next step
Choose the next step for E02
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | KDFE204HSS-PUMP |
| voltage_rating | 120V AC |
Common Questions
What does E02 error mean on Kelvinator dishwasher?
E02 indicates a drainage error, where water fails to drain properly, causing incomplete cycles.
Can I fix Kelvinator dishwasher E02 error myself?
Yes, check and clear blockages in the filter and drain hose as a first step.
How much does it cost to fix E02 error?
Repair costs range from $100 to $300, depending on parts and labor in your area.
When should I call a technician for E02?
Call a technician if blockages are cleared but the error persists, or if the pump appears faulty.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!