JennAir Cooktop Error F58
⚡ Quick Answer: The Jennair cooktop F58 error code signals a malfunction in the induction cooktop's Power Control Board or its wiring. This issue may cause erratic di... ✅ DIY Fixable
What Does Error F58 Mean?
The Jennair cooktop F58 error code signals a malfunction in the induction cooktop's Power Control Board or its wiring. This issue may cause erratic display behavior and prevent the cooktop from heating properly. A power reset can sometimes clear the error temporarily, but if the F58 code reappears, further inspection and repair of the control board and wiring are necessary.
Common Symptoms:
- Cooktop displays F58 error code
- Cooktop may not operate normally until issue addressed
Possible Causes
- Power Control Board fault or wiring issue (high)
How to Fix Error F58
DIY Fix Reset power to cooktop
- Turn off the circuit breaker(s) feeding the cooktop for at least one minute.
- Turn the circuit breaker(s) back on.
- Observe the cooktop for about one minute to see if F58 reappears.
Technician Only Inspect and repair power control board and wiring
- Disconnect power to the cooktop at the breaker.
- Remove cooktop control panel or access panel as needed.
- Inspect wiring harnesses to the Power Control Board for loose connections, damage, or burn marks.
- Test the Power Control Board for proper function and replace if defective.
- Reassemble and restore power, then verify cooktop operation.
Parts needed: Power Control Board, wiring harness/connectors
- If F58 returns after power reset
- If you are not comfortable accessing internal components or handling electrical connections safely
- If wiring shows signs of damage or board tests indicate failure
Next step
Choose the next step for F58
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Power Control Board
Distributes and switches electrical power for the appliance's major loads.
- Typical part-only price
- $90 - $260
- DIY difficulty
- Hard
- Estimated time
- 30-75 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Cooktop parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 3000W |
|---|---|
| component | Control Board |
| resistance | 5-15 ohms |
| part_number | JEA8480ADP |
| voltage_rating | 240V AC |
Common Questions
What does F58 error mean on Jennair cooktop?
F58 indicates a malfunction in the cooktop's Power Control Board or wiring, causing heating issues.
Can I fix Jennair cooktop F58 error myself?
Yes, you can try resetting the power by turning off the circuit breaker for a minute.
How much does it cost to fix F58 error?
$150–$400 for parts and labor, depending on the repair needed.
When should I call a technician for F58?
Call a technician if the error returns after a reset or if you're uncomfortable with electrical repairs.
Sources & References
Data last verified: 2026-07-26
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!