Indesit Dryer Error F16
⚡ Quick Answer: The Indesit Dryer F16 error indicates a malfunction with the drum lock position sensor, which can cause the drum to stop in the incorrect position, pr... ✅ DIY Fixable
What Does Error F16 Mean?
The Indesit Dryer F16 error indicates a malfunction with the drum lock position sensor, which can cause the drum to stop in the incorrect position, preventing the drying cycle from completing. This issue may also prevent the drum from locking properly at the start or end of the cycle, leading to ineffective drying. If you see this error, it's essential to check the drum position sensor and related components for faults.
Common Symptoms:
- Dryer displays F16 on digital display
- Drum stops in incorrect position
- Drum may not lock in correct position to start or end cycle
Possible Causes
- Fault with drum lock position sensor (medium)
- Mechanical drum jam / obstruction (low)
- Wiring/connectivity issue between sensor and control board (low)
How to Fix Error F16
DIY Fix Basic checks and reset
- Unplug the dryer from mains power and leave disconnected for at least 2–5 minutes.
- Reconnect power and attempt to restart a drying cycle.
- Observe whether the F16 code reappears.
Technician Only Inspect drum position sensor and related components
- Disconnect the dryer from mains power.
- Remove access panels to locate the drum lock/position sensor and wiring harness.
- Check that the drum rotates freely and inspect for obstructions.
- Verify sensor connections and continuity with a multimeter.
- Replace failed sensor or repair damaged wiring as needed.
Parts needed: Drum position sensor, Wiring harness/connectors
- If the error persists after basic reset and mechanical inspection.
- If you are uncomfortable with opening panels or using a multimeter.
- If there are signs of internal wiring damage.
Next step
Choose the next step for F16
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
- Typical part-only price
- $20 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F16 error mean on Indesit Dryer?
The F16 error indicates a fault with the drum lock position sensor, causing the drum to stop incorrectly.
Can I fix Indesit Dryer F16 error myself?
Yes, you can perform basic checks by unplugging the dryer, resetting it, and observing if the error reoccurs.
How much does it cost to fix F16 error?
Repair costs are typically low to medium, depending on parts and labor associated with replacing the sensor.
When should I call a technician for F16?
Call a technician if the error persists after a reset, or if you’re uncomfortable with DIY repairs.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!