Indesit Dryer: making noise
What is this symptom?
Is your Indesit dryer making unusual noises like squealing, grinding, or banging? These disruptive sounds often indicate issues such as foreign objects in the drum, worn drive belts, or obstructed blower wheels. Addressing these problems promptly can prevent further damage and ensure your dryer operates smoothly.
Important Tips for Indesit Models
- Indesit dryer unusual noises often attributed to uneven surfaces or faulty drum bearings/fan blades
Possible Causes
Foreign objects inside the drum (coins, keys, small items)
How to Identify: Rattling noise that changes when the drum rotation speed changes; visual inspection reveals objects in drum or lint trap.
Part: Drum interior
Worn or loose drive belt or idler pulley
How to Identify: High-pitched squealing or screeching; belt visible wear or slack on inspection.
Part: Drive belt/Idler pulley
Obstructed or damaged blower wheel
How to Identify: Rumbling or vibrating noise that corresponds to airflow cycles; inspection reveals lint obstruction or wheel wobble.
Part: Blower wheel
Loose drum baffles or dented drum
How to Identify: Thumping or banging that aligns with drum rotation, inspection shows loose internal baffles.
Part: Drum baffles/Drum shell
DIY Solutions
Remove foreign objects and redistribute load
- Open the dryer door and visually inspect the drum for coins, buttons, or small objects.
- Check and clean the lint trap.
- Redistribute heavy or uneven loads and run a test cycle.
Level the dryer
- Use a level on top of the dryer to check front-to-back and side-to-side.
- Adjust the dryer’s feet legs by turning to raise/lower corners until level.
- Tighten any locking nuts once level is achieved.
Inspect and replace worn drum rollers or bearings
- Unplug the dryer and remove the rear panel.
- Rotate the drum by hand and observe roller movement.
- Replace any worn or noisy rollers/bearings.
- Reassemble panels and test.
Replace drive belt and idler pulley
- Unplug the dryer.
- Access the drive assembly by removing panels.
- Inspect and replace the drive belt and idler pulley with new parts.
- Reassemble and test run.
Next step
Choose the next step for making noise
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drive Belt
Transfers rotational power from the motor to turn the drum or tub.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 20-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Dryer Idler Pulley
Maintains tension on the dryer drum belt as the drum rotates.
Dryer Blower Wheel
Moves heated air through the dryer drum and exhaust system.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Professional Repairs
Replace blower wheel or housing
Drum and internal support overhaul
When to Call a Professional
Preventive Maintenance
-
Clean lint trap and check pockets every cycle: Foreign object rattling and airflow restriction
Frequency: Every load -
Check dryer level periodically: Vibration and uneven wear
Frequency: Monthly -
Annual vent and internal lint cleaning: Blower strain and noise
Frequency: Annually -
Inspect belts and rollers for wear: Mechanical noise due to wear
Frequency: Annually
Frequently Asked Questions
Why is my Indesit Dryer making noise?
How do I fix Indesit Dryer making noise myself?
How much does it cost to fix making noise?
When should I call a technician for making noise?
References & Sources
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Worn drum bearings
- Loose or damaged drive belt
- Foreign objects in the drum or blower
User Suggested Solutions
-
Inspect the drum bearings for wear. To replace them, unplug the dryer, remove the front panel, and access the drum. Replace the bearings with new ones and reassemble the dryer.
-
Check the drive belt for any signs of damage or looseness. If damaged, replace it by removing the front panel, detaching the belt, and installing a new one.
-
Inspect the drum for foreign objects. Remove any items found in the drum or blower area. Ensure the drum is clear and reassemble the dryer.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!