Ilve Dishwasher Error E14

⚡ Quick Answer: The Ilve dishwasher error E14 indicates a malfunction related to the main control board or internal control electronics. This can result in the dishwa... ✅ DIY Fixable

What Does Error E14 Mean?

The Ilve dishwasher error E14 indicates a malfunction related to the main control board or internal control electronics. This can result in the dishwasher failing to start, stopping unexpectedly during cycles, or displaying the E14 error code on the control panel. Troubleshooting may involve basic power cycling or checking for visible damage to the electronics. If the issue persists, further inspection or replacement of the control board may be necessary.

Common Symptoms:

  • Dishwasher may not start
  • Cycle may stop randomly
  • Error E14 displayed on control panel

Possible Causes

  • Main control board communication fault / internal control electronics error (low)

How to Fix Error E14

DIY Fix Power cycle and basic checks

  1. Turn off the circuit breaker or unplug the dishwasher for at least 5 minutes.
  2. Restore power and try running a short cycle to see if the error clears.

Technician Only Inspect and repair/replace control board

  1. Disconnect power and remove the inner door panel to access the main control board.
  2. Visually inspect for signs of damage (burnt components, swollen capacitors, corrosion).
  3. Check and reseat multi‑pin harness connectors to the control board.
  4. Test and replace the main control board if damage is found or error persists.

Parts needed: Main control board, Harness connectors

🛑 When to Call a Pro:
  • If the error persists after power cycling and basic checks
  • If any physical damage to electronics is observed
  • If user is uncomfortable performing internal inspections

Next step

Choose the next step for E14

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Main Control Board

The central brain of the appliance that controls all components, cycles, and timings.

Typical part-only price
$120 - $280
DIY difficulty
Medium
Estimated time
20-40 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 50W
component Drain Pump
resistance 10-20 ohms
part_number ILVE-DP1234
voltage_rating 240V AC

Common Questions

What does E14 error mean on Ilve dishwasher?

E14 indicates a malfunction with the main control board or internal electronics, causing the dishwasher to not start or stop randomly.

Can I fix Ilve dishwasher E14 error myself?

Yes, you can try power cycling the dishwasher or checking for visible damage. If the error persists, it's best to call a technician.

How much does it cost to fix E14 error?

Repair costs can be moderate to high, especially if the control board needs to be replaced.

When should I call a technician for E14?

Call a technician if the error continues after basic troubleshooting or if you notice physical damage.

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!