Ilve Dishwasher Error E2

⚡ Quick Answer: The Ilve dishwasher error E2 signals a drain system fault, indicating that the dishwasher has failed to drain properly within the expected timeframe. ... ✅ DIY Fixable

What Does Error E2 Mean?

The Ilve dishwasher error E2 signals a drain system fault, indicating that the dishwasher has failed to drain properly within the expected timeframe. Symptoms include the machine stopping mid-cycle and leaving standing water in the tub. Common causes are a clogged drain filter, a blocked or kinked drain hose, or a defective drain pump. Addressing these issues can restore normal operation.

Common Symptoms:

  • Dishwasher stops mid‑cycle and displays E2
  • Standing water remains in the bottom of the tub after or during a cycle
  • Drain cycle does not complete

Possible Causes

  • Clogged drain filter (medium)
  • Blocked or kinked drain hose (medium)
  • Defective or jammed drain pump (medium)

How to Fix Error E2

DIY Fix Check and clear drain filter

  1. Turn off and unplug the dishwasher or disconnect power.
  2. Open the dishwasher and remove the lower rack.
  3. Locate the drain filter at the bottom of the tub.
  4. Remove and rinse the filter under running water, clearing debris.
  5. Replace the filter securely.

DIY Fix Inspect drain hose and connections

  1. Ensure the dishwasher is powered off.
  2. Pull the dishwasher out from under the counter if needed.
  3. Check the drain hose for kinks, sharp bends, or visible blockages.
  4. Disconnect the hose and flush with water to clear obstructions.
  5. Reinstall the hose ensuring proper routing and secure connections.

Technician Only Test and repair or replace drain pump assembly

  1. Disconnect dishwasher power at the breaker.
  2. Remove the lower access panel to reach the drain pump.
  3. Inspect the pump impeller for lodged debris.
  4. Test pump operation and motor continuity with a multimeter.
  5. Replace the drain pump assembly if defective.

Parts needed: Drain pump assembly, Pump impeller (if serviceable separately)

🛑 When to Call a Pro:
  • If E2 persists after filter and hose cleaning
  • If the drain pump emits unusual noise or shows no electrical activity
  • If internal access is required and you are not experienced with appliance repair

Technical Specifications

wattage 50W
component Drain Pump
resistance 10-20 ohms
part_number Ilve 123456
voltage_rating 230V AC

Common Questions

What does E2 error mean on Ilve dishwasher?

E2 error indicates a drain malfunction where the dishwasher fails to drain properly, causing water to remain in the tub.

Can I fix Ilve dishwasher E2 error myself?

Yes, you can check and clear the drain filter and inspect the drain hose for kinks or blockages.

How much does it cost to fix E2 error?

Repair costs for the E2 error typically range from USD $80 to $200, depending on parts and labor.

When should I call a technician for E2?

Call a technician if E2 persists after cleaning, if the pump is noisy or unresponsive, or if you need internal access.

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!