Hotpoint Induction Hob Error F05

⚡ Quick Answer: The Hotpoint induction hob F05 error indicates a malfunction typically associated with the temperature sensor or thermal protection system. This error... ✅ DIY Fixable

What Does Error F05 Mean?

The Hotpoint induction hob F05 error indicates a malfunction typically associated with the temperature sensor or thermal protection system. This error often results in an unresponsive display or the hob failing to heat during or after cooking. You may notice the error code accompanied by flashing indicators or an H signal before the hob shuts down. If the error reappears after a power reset or cooling period, further inspection is needed.

Common Symptoms:

  • F05 code appears on display during or after cooking
  • Hob shuts down or stops heating
  • Possible flashing or combination with H or heat indications prior to shutdown
  • May reappear after power reset or cooling period

Possible Causes

  • Temperature sensor or heat detection component fault (low)

How to Fix Error F05

DIY Fix Basic checks and reset

  1. Turn the hob off at the mains power supply.
  2. Allow the hob to cool completely before attempting further use.
  3. Ensure the surface is clean and dry; remove any spilled food or liquid.
  4. Try switching the hob back on after a full cool‑down to see if the code clears.

Technician Only Inspect and test induction hob temperature sensors / control interface

  1. Disconnect the hob from mains power and remove the unit from its installation if necessary.
  2. Access the internal temperature sensors and related wiring harnesses.
  3. Visually inspect for burnt connectors, loose connections, or damage to sensors.
  4. Use a multimeter to test continuity and proper resistance values of NTC temperature sensors according to model specifications.
  5. Verify the control board and user interface communication integrity.
  6. Replace the faulty sensor or control module as indicated by diagnostics.

Parts needed: Temperature sensor (NTC/thermal sensor), Control interface board (if needed), Connectors and harnesses

🛑 When to Call a Pro:
  • If the error persists after basic reset and cooling
  • If there are signs of electrical smell, smoke, or repeated overheating shutdowns
  • If internal components show damage on inspection

Technical Specifications

wattage 2000W
component Induction Coil
resistance 5-15 ohms
part_number C00212230
voltage_rating 230V AC

Common Questions

What does F05 error mean on Hotpoint induction hob?

F05 indicates a malfunction, typically linked to the temperature sensor or thermal protection system.

Can I fix Hotpoint induction hob F05 error myself?

Yes, you can perform basic checks like resetting the power and ensuring the surface is clean.

How much does it cost to fix F05 error?

Estimated repair costs range from £100 to £250, including parts and labor.

When should I call a technician for F05?

Call a technician if the error persists after a reset or if you notice signs of electrical issues.

Data last verified: 2026-03-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!