Hotpoint Dryer Error F16
⚡ Quick Answer: The Hotpoint Dryer F16 error indicates a fault with the drum lock position sensor, which can cause the drum to stop in the wrong position or not lock ... ✅ DIY Fixable
What Does Error F16 Mean?
The Hotpoint Dryer F16 error indicates a fault with the drum lock position sensor, which can cause the drum to stop in the wrong position or not lock properly. This error often results in the dryer not starting or functioning normally, and no heat may be generated during the drying cycle. Troubleshooting may involve inspecting the drum lock position sensor and related circuitry for malfunctions.
Common Symptoms:
- Dryer displays error F16 on digital panel
- Drum may not stop in correct position
- Dryer functions may be limited or fail to start normally
Possible Causes
- Fault or malfunction in drum lock position sensor or related circuitry (medium)
How to Fix Error F16
DIY Fix Basic checks and power reset
- Turn off the dryer and unplug it from the power outlet.
- Wait at least 2 minutes, then plug it back in and power on.
- Try restarting a simple drying cycle to see if the F16 error clears.
Technician Only Inspect and repair drum lock position sensor or associated components
- Disconnect power and access the dryer’s drum assembly area.
- Inspect the drum lock position sensor and its wiring harness for damage or loose connections.
- Test the sensor with appropriate diagnostic tools.
- Replace the drum lock position sensor or repair wiring as needed.
- Reassemble and verify that the dryer operates without showing F16.
Parts needed: Drum lock position sensor, Associated wiring harness/connectors
- If the F16 error persists after basic power reset
- If you observe mechanical issues with drum positioning or locking
- If you are not experienced with appliance electrical diagnostics
Next step
Choose the next step for F16
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
- Typical part-only price
- $20 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 5400W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | WH18X10024 |
| voltage_rating | 240V AC |
Common Questions
What does F16 error mean on Hotpoint Dryer?
F16 indicates a drum lock position sensor fault, causing issues with drum positioning and heat generation.
Can I fix Hotpoint Dryer F16 error myself?
Yes, try power resetting the dryer by unplugging it for 2 minutes, then restarting.
How much does it cost to fix F16 error?
Repair costs for the F16 error typically range from ¥10,000 to ¥30,000+, depending on parts and labor.
When should I call a technician for F16?
Call a technician if the error persists after a reset or if you notice mechanical issues with the drum.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!