Hoover Refrigerator Error E13

⚡ Quick Answer: The Hoover refrigerator error E13 indicates a malfunction that may stem from a communication fault between the control board and key components such a... ✅ DIY Fixable

What Does Error E13 Mean?

The Hoover refrigerator error E13 indicates a malfunction that may stem from a communication fault between the control board and key components such as the compressor, fans, or temperature sensors. This can lead to inconsistent cooling and fluctuating temperatures in your fridge or freezer. If you see the E13 code displayed, it is crucial to address the issue promptly to maintain optimal appliance performance.

Common Symptoms:

  • E13 displayed on control panel or error display
  • Associated with fault conditions in fridge/freezer (community reports only)

Possible Causes

  • Temperature Sensor

How to Fix Error E13

DIY Fix Basic power reset and visual check

  1. Unplug the refrigerator from mains power.
  2. Wait approximately 10 minutes.
  3. Plug the refrigerator back in and observe if the E13 error persists.
  4. Check for any obvious loose connectors at the control panel or visible wiring harnesses.

Technician Only Diagnostic check of control board communications

  1. Connect diagnostic tools to the refrigerator’s control board if supported by model documentation.
  2. Verify communication between the main control board and key components (compressor, evaporator fan, sensors).
  3. Inspect and test sensor continuity (temperature sensors) and fan motors.
  4. Check wiring harness integrity and connector seating.
  5. Replace defective components as identified per diagnostic results.

Parts needed: Control board (if communication faults present), Temperature sensors, Fan motors, Wiring harness/connectors

🛑 When to Call a Pro:
  • If the error persists after a power reset and basic visual check.
  • If there are signs of electrical issues (burnt connectors, unusual noises, smells).
  • If you lack tools/knowledge to safely test control board and sensors.

Technical Specifications

wattage N/A
component Temperature Sensor
resistance 5-10 kOhms
part_number Hoover 123456789
voltage_rating 120V AC

Common Questions

What does E13 error mean on Hoover refrigerator?

E13 indicates a communication fault between the control board and components, leading to cooling issues.

Can I fix Hoover refrigerator E13 error myself?

Yes, try a power reset and visual check. Unplug for 10 minutes, then reconnect.

How much does it cost to fix E13 error?

Repair costs can vary from $100 to over $500, depending on parts needed.

When should I call a technician for E13?

Call a technician if E13 persists after a reset, or if you notice electrical issues.

Data last verified: 2026-04-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!