Hoover Refrigerator: not cooling

Possible Causes

Dirty or blocked condenser coils reducing heat dissipation

How to Identify: Dust buildup visible on coils (back or beneath fridge, fridge runs more often with little cooling

Part: Condenser coils

Faulty compressor start relay or compressor failure

How to Identify: Compressor not running or short cycling; clicking noises and fridge not cooling even after coil and fan checks

Part: Start relay / Compressor

DIY Solutions

Clean condenser coils

Moderate 30–60 minutes

Tools Needed: vacuum with brush attachment, coil cleaning brush

1. Unplug refrigerator
2. Locate condenser coils (back or underneath) and remove dust with brush and vacuum
3. Plug in fridge and monitor cooling over next 24 hours

⚠️ Safety First: Always unplug before cleaning coils

Ensure proper airflow and clear blocked vents

Easy 10–20 minutes

1. Remove food blocking air vents inside fridge/freezer
2. Rearrange contents to allow airflow
3. Verify vents are not ice-blocked; defrost if necessary

Check and adjust thermostat settings

Easy 5–10 minutes

1. Locate thermostat control
2. Set fridge to recommended temperature
3. Wait 24 hours to observe temperature changes

Inspect evaporator fan operation

Moderate 20–40 minutes

Tools Needed: screwdriver

1. Unplug fridge and open freezer section
2. Locate evaporator fan and manually spin blades
3. If stuck or noisy, replace fan motor
4. Reassemble and test cooling

⚠️ Safety First: Unplug before accessing internal components

Next step

Choose the next step for not cooling

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Condenser Coil Assembly

Releases heat from the refrigerant circuit and must match the appliance's sealed-system design.

Typical part-only price

$80 - $400

DIY difficulty

Hard

Estimated time

120-240 mins

Optional: enter your model number

Apply

Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Refrigerator parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Refrigerator Condenser Coil Brush

For routine cleaning of accessible condenser areas where the manufacturer permits it. It does not repair a sealed-system or compressor fault.

View maintenance supply

Maintenance supply

Model-Compatible Refrigerator Water Filter

A routine replacement item on models with a water filter. Match the complete appliance model and existing filter number before ordering.

Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.

Find one that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Professional Repairs

Replace faulty compressor start relay

Estimated Cost: $40–$120

Compressor replacement

Estimated Cost: $300–$600+

When to Call a Professional

Compressor not running or overheating

Refrigerant leak suspected (hissing/oily residue)

Electrical failures beyond DIY troubleshooting

Preventive Maintenance

• Clean condenser coils: Cooling inefficiency due to dirty coils
  Frequency: every 6–12 months
• Check door seals: Warm air infiltration leading to cooling loss
  Frequency: annually

Frequently Asked Questions

Why is my Hoover Refrigerator not cooling?

Common causes include dirty condenser coils and a faulty compressor start relay.

How do I fix Hoover Refrigerator not cooling myself?

You can clean the condenser coils, ensure proper airflow, adjust the thermostat, or inspect the evaporator fan.

How much does it cost to fix not cooling?

Professional repairs can range from $40–$120 for a start relay to $300–$600+ for compressor replacement.

When should I call a technician for not cooling?

If DIY solutions fail or if you suspect a serious issue like compressor failure, call a technician immediately.

References & Sources

• Fridge Not Cooling? 7 Causes and Easy Fixes Community

User Suggested Solutions

1. Leave the refrigerator overnight to allow it to cool down.

Community Discussions

fridge isn't cooling and just beeping

The beeping stopped after leaving it overnight, indicating it needed time to cool down.

Pro needed View on Reddit →

Source: Reddit r/appliancerepair