Hoover Oven Error E13
⚡ Quick Answer: The Hoover oven E13 error indicates a malfunction in the clock/timer electronic control module. This issue may prevent the oven from starting, and you... ✅ DIY Fixable
What Does Error E13 Mean?
The Hoover oven E13 error indicates a malfunction in the clock/timer electronic control module. This issue may prevent the oven from starting, and you might notice that the clock or timer functions are not operating correctly. If you hear unusual clicking sounds or the oven fails to heat, these could be related symptoms. Troubleshooting steps include checking power supply and resetting the oven.
Common Symptoms:
- E13 displayed on oven control panel
- Clock/timer functions not operating correctly
- Oven may not start or cycles may not begin
Possible Causes
- Faulty electronic timer/clock control module (medium)
- Loss of supply or damaged wiring to the timer module (medium)
How to Fix Error E13
DIY Fix Basic user checks before servicing
- Ensure power to the oven is disconnected before any physical checks
- Verify the clock is set correctly and the oven is not in automatic/delayed-start mode
- Reset the oven by disconnecting mains for a few minutes and then restore power and re‑set the clock
Technician Only Inspect and repair or replace timer/clock module
- Disconnect oven from mains power
- Remove the control fascia to access the timer/clock PCB
- Inspect wiring and connections to the timer for damage, burnt components, cracked solder joints or damaged connectors
- Test input supply to the timer module for correct mains presence
- Replace the electronic timer/clock module if found faulty
- Reassemble and test the oven
Parts needed: Timer/clock control module, Associated connectors/wiring
- If disassembly or inspection of internal electronic components is beyond your skill level
- If replacing the timer/clock module does not clear the error
Next step
Choose the next step for E13
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Heating Element
Heats the water or air inside the appliance to the required temperature.
- Typical part-only price
- $40 - $95
- DIY difficulty
- Medium
- Estimated time
- 30-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Thermostat
Regulates temperature by turning the heating or cooling system on or off.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E13 error mean on Hoover oven?
E13 indicates a fault in the clock/timer control module, causing the oven to not start.
Can I fix Hoover oven E13 error myself?
Yes, you can check the power supply, ensure the clock is set, and reset the oven.
How much does it cost to fix E13 error?
The estimated repair cost ranges from $80 to $250, depending on parts and labor.
When should I call a technician for E13?
Call a technician if you cannot inspect internal components or if the error persists after replacing the timer.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!