Hoover Oven Error E01
⚡ Quick Answer: The Hoover oven error E01 signifies a malfunction in the temperature sensor circuit, which can lead to erratic temperature readings or failure to heat... ✅ DIY Fixable
What Does Error E01 Mean?
The Hoover oven error E01 signifies a malfunction in the temperature sensor circuit, which can lead to erratic temperature readings or failure to heat. This error typically appears shortly after the oven is turned on, indicating that the oven's internal temperature sensing circuit is compromised. Common causes include a faulty temperature sensor (NTC) or damaged wiring between the sensor and control board.
Common Symptoms:
- Oven will not heat when a cooking function is selected
- E01 displays shortly after turning on the oven
Possible Causes
- Faulty oven temperature sensor (NTC) or its circuit (medium)
- Damaged or open/shorted wiring between temperature sensor and control board (medium)
How to Fix Error E01
DIY Fix Check power cycle and basic sensor wiring visibility
- Turn off and unplug the oven at the wall isolator or circuit breaker.
- Wait a few minutes then restore power to see if the code clears.
- Visually inspect accessible sensor wiring for obvious damage or loose connections (do not disassemble beyond user access).
Technician Only Diagnose and repair temperature sensor circuit
- Disconnect power at the isolator.
- Remove necessary panels to access the oven temperature sensor (NTC) and wiring harness.
- Measure the sensor resistance at room temperature with a multimeter; compare against manufacturer spec.
- Inspect wiring and connectors for open, shorted, or damaged conditions.
- Replace the temperature sensor if out of range or damaged, and repair/replace wiring as needed.
- If sensor and wiring are intact but fault persists, assess the main control PCB sensor input circuit and repair or replace the PCB as required.
Parts needed: Oven temperature sensor (NTC), Wiring harness/connectors, Possibly main control PCB
- If you are not comfortable working with live electricity or internal oven components.
- If error persists after basic checks and component testing (sensor/wiring).
Next step
Choose the next step for E01
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Temperature Sensor |
| resistance | 1000-2000 ohms |
| part_number | HOO-TS1234 |
| voltage_rating | 240V AC |
Common Questions
What does E01 error mean on Hoover oven?
E01 indicates a malfunction in the temperature sensor circuit, causing heating issues.
Can I fix Hoover oven E01 error myself?
Yes, you can perform basic checks like power cycling the oven and inspecting sensor wiring for damage.
How much does it cost to fix E01 error?
Repair costs range from $50–$250+ for sensor and wiring, or $200–$500+ for control board and labor.
When should I call a technician for E01?
Call a technician if you're uncomfortable with electrical components or if the error persists after basic checks.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!