Hisense Washing Machine Error F03
⚡ Quick Answer: The Hisense Washing Machine F03 error indicates a drainage fault, often due to a malfunction in the water level sensor or issues with the drainage sys... ✅ DIY Fixable
What Does Error F03 Mean?
The Hisense Washing Machine F03 error indicates a drainage fault, often due to a malfunction in the water level sensor or issues with the drainage system. Symptoms include the machine failing to fill with water, stopping mid-cycle with the F03 code displayed, and possibly leaving water in the tub. Common causes include a blocked or kinked drain hose, a clogged pump filter, or a malfunctioning drain pump.
Common Symptoms:
- Water not draining at end of cycle
- Machine stops with F03 displayed
- Possible water remaining in tub
- Drain/pump filter clog evidence
Possible Causes
- Blocked or kinked drain hose or drain path (medium)
- Clogged pump filter or debris in drain pump (medium)
- Drain pump malfunction (jammed impeller or failure) (medium)
How to Fix Error F03
DIY Fix Check and clear drainage path
- Unplug the washing machine from power.
- Inspect drain hose for kinks, bends, or clogs; straighten and clear blockages.
- Place towels to catch water and open the drain pump access cover.
- Remove and thoroughly clean the pump filter.
- Reassemble and run a drain or spin cycle to test if F03 clears.
Technician Only Inspect and service drain pump and internal components
- Disconnect machine from power and water.
- Remove rear or front access panel to reach the drain pump.
- Inspect impeller for jammed debris and test pump operation.
- Replace drain pump if impeller is damaged or pump fails to operate.
- Verify drain hose connection and correct installation height.
- Reassemble and test with a drain/spin cycle.
Parts needed: Drain pump, Pump filter, Drain hose
- After performing user-level drainage checks if F03 persists
- If you are uncomfortable accessing internal components or the pump mechanism
- If the machine leaks water when panels are opened
Next step
Choose the next step for F03
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Water Level Sensor |
| resistance | 0-5 ohms |
| part_number | Hisense 0022001234 |
| voltage_rating | 120V AC |
Common Questions
What does F03 error mean on Hisense Washing Machine?
F03 indicates a drainage fault due to water level sensor issues or blocked drainage.
Can I fix Hisense Washing Machine F03 error myself?
Yes, you can check and clear the drainage path and pump filter.
How much does it cost to fix F03 error?
Repair costs for the F03 error range from $50 to $200 for parts only.
When should I call a technician for F03?
Call a technician if F03 persists after user checks or if you're uncomfortable with repairs.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!