Hisense Washing Machine: not draining
What is this symptom?
Is your Hisense washing machine not draining? After completing the wash cycle, water remains in the drum, possibly indicating a drainage fault (error F03). This issue may arise from a clogged pump filter, incorrect settings, or deeper internal blockages. Discover effective solutions to resolve this common problem.
Important Tips for Hisense Models
- Hisense error code F03 indicates drainage fault; Hisense suggests checking drain pipe and pump filter then performing reset or contacting service if unresolved
Possible Causes
Clogged or blocked drain pump filter
How to Identify: Water remains in tub after cycle; visible debris in filter area; error codes like F03 on Hisense models
Part: Drain pump filter
Incorrect cycle/user settings or reset required
How to Identify: Drain cycle not selected or machine needs reset; F03 directive to start drain program or reset
Part: Control system / settings interface
Internal blockage beyond filter (e.g., internal hose or pump inlet)
How to Identify: Persistent blockage despite external filter/hose cleaning; professional inspection required
Part: Internal drain hose/pump inlet
DIY Solutions
Clean drain pump filter
- Unplug machine and position a bucket/towel under filter access
- Open filter cover, unscrew and pull out filter
- Remove lint/coins/objects, rinse filter under water
- Replace filter securely and run drain cycle
Check and straighten drain hose
- Unplug washer, pull out and inspect drain hose
- Straighten kinks and remove visible obstructions
- Ensure hose height and position as per manual
- Reattach securely and test drainage
Reset and run explicit drain cycle
- Turn machine off and unplug for 1 minute
- Plug in and select drain or spin cycle
- Start and observe if water is removed
Next step
Choose the next step for not draining
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Professional Repairs
Replace drain pump motor
Inspect and clear deep internal blockages
When to Call a Professional
Preventive Maintenance
-
Clean drain pump filter: Blockages that cause not draining
Frequency: monthly -
Inspect and clear drain hose: Hose kinks and buildup leading to blockage
Frequency: every 3 months
Frequently Asked Questions
Why is my Hisense Washing Machine not draining?
How do I fix Hisense Washing Machine not draining myself?
How much does it cost to fix not draining?
When should I call a technician for not draining?
References & Sources
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Clogged drain filter
- Blocked drain hose
- Faulty drain pump
User Suggested Solutions
-
Check and clean the drain filter. Locate the filter, usually at the front bottom of the machine. Open the cover, remove the filter, and clean any debris. Reinstall and test the machine.
-
Inspect the drain hose for kinks or blockages. Disconnect the hose from the back of the machine and check for any obstructions. Clear any clogs and reconnect the hose.
-
Test the drain pump for functionality. Unplug the machine, access the pump, and check for any visible damage or blockages. If defective, replace the pump.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
Community Discussions
Washing machine wouldn't drain, F03 error
User drained the filter and restarted the machine, which temporarily resolved the issue.
Source: Reddit r/appliancerepair
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!