Hisense Washing Machine: making noise during spin cycle

Professional Repair Guide

What is this symptom?

Is your Hisense washing machine making loud noises during the spin cycle? This can manifest as banging, rattling, or grinding sounds, indicating potential issues. Common causes include an unbalanced load, worn drum bearings, or foreign objects in the drum. Addressing these problems promptly can prevent further damage and ensure smooth operation.

Urgency: Medium

Important Tips for Hisense Models

Hisense official guidance emphasizes checking for shipping transit bolts and ensuring machine leveling to prevent noise and vibration.

Possible Causes

Unbalanced load or uneven laundry distribution

How to Identify: Loud banging or thumping, excessive vibration during spin; often improves after redistributing clothes.

Part: Drum/load

Worn or damaged drum bearings

How to Identify: Grinding, rumbling or roaring noise that increases with spin speed; possible drum play when moved by hand.

Part: Drum bearings

Foreign objects in drum or pump filter

How to Identify: Rattling, clanking, or scraping noises; inspection may reveal coins, buttons or pins trapped between drum and tub or in filter.

Part: Drum interior/pump filter

Faulty or loose suspension components (springs/shock absorbers)

How to Identify: Loud banging and shaking, especially front‑load machines; uneven drum movement.

Part: Suspension springs/shock absorbers

Loose or worn drive belt or pulley

How to Identify: Squealing or slapping noises, especially if belt is visibly worn or loose when inspected.

Part: Drive belt/pulley

Drain pump blockage or fault

How to Identify: Grinding or humming noise during spin/drain; poor water removal.

Part: Drain pump

DIY Solutions

Redistribute laundry and balance load

Easy 5–10 minutes

Pause the cycle and open the door.
Rearrange clothes so weight is evenly distributed around the drum.
Close door and restart spin cycle.

⚠️ Safety First: Do not force open door mid‑cycle on front‑load machines unless design allows safe pause.

Check for trapped objects in drum and filter

Moderate 10–20 minutes

Tools Needed: Flashlight, Screwdriver (depending on access)

Unplug the washer.
Inspect the drum interior for loose items between drum and tub.
Clean the pump filter (location per manual) and remove debris.
Run a short spin to confirm reduction in noise.

⚠️ Safety First: Always unplug appliance before checking inside components.

Level the washing machine

Easy 10–15 minutes

Tools Needed: Spirit level, Wrench if adjustable feet

Place spirit level on top of machine.
Adjust feet until washer is level side‑to‑side and front‑to‑back.
Ensure all feet are firmly on floor and retest with spin cycle.

Next step

Choose the next step for making noise during spin cycle

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Drum Bearing Kit

Supports the spinning drum and ensures smooth, quiet rotation during cycles.

Typical part-only price: $40 - $95
DIY difficulty: Hard
Estimated time: 120-180 mins

Optional: enter your model number

Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Washer Shock Absorber

Dampens tub movement and vibration during high-speed spin cycles.

$25 - $100 · Medium · 45-90 mins

Check fit & price

Possible related component

Drive Belt

Transfers rotational power from the motor to turn the drum or tub.

$15 - $35 · Easy · 20-30 mins

Check fit & price

Possible related component

Drain Pump

Pumps waste water out of the appliance during the drain cycle.

$35 - $80 · Easy · 15-30 mins

Check fit & price

Model number required

Model-compatible Washing Machine parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Washing Machine Cleaner Tablets

Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.

View maintenance supply

Maintenance supply

Braided Washer Inlet Hoses

A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.

View maintenance supply

Maintenance supply

Washer Drain Hose Holder

Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Professional Repairs

Replace drum bearings

Estimated Cost: $150–$400

Replace suspension springs or shock absorbers

Estimated Cost: $100–$250

Replace drive belt or pulley

Estimated Cost: $50–$150

Repair or replace drain pump

Estimated Cost: $80–$200

When to Call a Professional

Noise persists after load redistribution and basic checks

Grinding/rumbling noises indicative of bearing or internal component wear

Excessive vibration or movement suggesting suspension failure

Visible belt damage or suspected pump failure

Preventive Maintenance

Run regular check of leveling and adjust feet if needed: Noise and vibration during spin cycle
Frequency: monthly
Clean pump filter regularly: Foreign object noise and pump blockages
Frequency: monthly

Frequently Asked Questions

Why is my Hisense Washing Machine making noise during spin cycle?

Common causes include unbalanced loads, worn drum bearings, or foreign objects in the drum.

How do I fix Hisense Washing Machine making noise during spin cycle myself?

Redistribute laundry, check for trapped objects, and level the washing machine.

How much does it cost to fix making noise during spin cycle?

Professional repairs range from $50 to $400 depending on the issue.

When should I call a technician for making noise during spin cycle?

If DIY solutions don't resolve the noise, consider contacting a technician for complex issues.

References & Sources

Hisense support: Washing machine noisy or jumps when spinning Official

Community Analytical Insights

Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions

Common Issues Reported by Users

Worn or damaged drum bearings
Foreign objects trapped in the drum or pump
Unbalanced load during spin cycle

User Suggested Solutions

Inspect and replace worn or damaged drum bearings. To do this, unplug the washing machine, remove the back panel, and check the bearings for wear. If they are damaged, replace them with new ones. Reassemble the machine and test.
Check for foreign objects in the drum or pump. Open the door and inspect the drum for any items like coins or small clothing pieces. If necessary, remove the pump filter to check for blockages. Clear any obstructions and reassemble.
Ensure the load is balanced. Open the washing machine and redistribute the clothes evenly in the drum. Avoid overloading the machine and run a spin cycle to see if the noise persists.

Limited-source guidance; percentages and success-rate claims are not shown
View Sources

Hisense Washing Machine: making noise during spin cycle

What is this symptom?

Important Tips for Hisense Models

Possible Causes

Unbalanced load or uneven laundry distribution

Worn or damaged drum bearings

Foreign objects in drum or pump filter

Faulty or loose suspension components (springs/shock absorbers)

Loose or worn drive belt or pulley

Drain pump blockage or fault

DIY Solutions

Redistribute laundry and balance load

Check for trapped objects in drum and filter

Level the washing machine

Choose the next step for making noise during spin cycle

Drum Bearing Kit

Other parts options

Washer Shock Absorber

Drive Belt

Drain Pump

Model-compatible Washing Machine parts

Maintenance supplies

Washing Machine Cleaner Tablets

Braided Washer Inlet Hoses

Washer Drain Hose Holder

Professional Repairs

Replace drum bearings

Replace suspension springs or shock absorbers

Replace drive belt or pulley

Repair or replace drain pump

When to Call a Professional

Preventive Maintenance

Frequently Asked Questions

References & Sources

Community Analytical Insights

Common Issues Reported by Users

User Suggested Solutions

Inspect and replace worn or damaged drum bearings. To do this, unplug the washing machine, remove the back panel, and check the bearings for wear. If they are damaged, replace them with new ones. Reassemble the machine and test.

Check for foreign objects in the drum or pump. Open the door and inspect the drum for any items like coins or small clothing pieces. If necessary, remove the pump filter to check for blockages. Clear any obstructions and reassemble.

Ensure the load is balanced. Open the washing machine and redistribute the clothes evenly in the drum. Avoid overloading the machine and run a spin cycle to see if the noise persists.

User Comments (0)