Hisense Washing Machine Error E8
⚡ Quick Answer: The Hisense washing machine E8 error indicates a malfunction in the door lock mechanism or issues with the water level detection system. This may caus... ✅ DIY Fixable
What Does Error E8 Mean?
The Hisense washing machine E8 error indicates a malfunction in the door lock mechanism or issues with the water level detection system. This may cause the machine to stop shortly after starting or fail to drain water properly. Common causes include a faulty water level sensor or a blocked drain system. To resolve this, users can check and clean the drain hose and pump filter, ensuring that the machine can operate as intended.
Common Symptoms:
- Washer stops shortly after starting or will not start and displays E8
- Machine may fail to drain water or correctly sense water level
Possible Causes
- Water level sensor malfunction or incorrect water level feedback (medium)
- Drainage system blockage or drain pump fault (medium)
How to Fix Error E8
DIY Fix Check and clean drain system
- Turn off and unplug the washing machine
- Check the drain hose for kinks or visible blockages
- Access and clean the drain pump filter (typically behind a small bottom front panel) of lint/debris
- Reconnect and run a short drain/spin cycle to see if error clears
Technician Only Test and replace water level sensor or pump if necessary
- Inspect water level sensor and pressure hose for damage or disconnection
- Test water level sensor continuity and correct response
- Test drain pump for electrical continuity and proper operation
- Replace faulty sensor or pump as needed
Parts needed: water level sensor, drain pump, pressure hose
- If water remains in drum after all basic cleaning and checks
- Error persists after drain system cleaned and user‑level checks
- Unfamiliar with internal diagnostics or component replacement
Next step
Choose the next step for E8
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
- Typical part-only price
- $25 - $65
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Door Lock Assembly |
| resistance | 1-5 ohms |
| part_number | HIS-DLA-001 |
| voltage_rating | 120V AC |
Common Questions
What does E8 error mean on Hisense washing machine?
E8 indicates a malfunction in the door lock mechanism or issues with water level detection, causing the machine to not start or drain.
Can I fix Hisense washing machine E8 error myself?
Yes, you can check and clean the drain hose and pump filter to potentially resolve the E8 error.
How much does it cost to fix E8 error?
Repair costs range from $50 to $200 for parts, plus labor.
When should I call a technician for E8?
Call a technician if water remains in the drum after cleaning or if the error persists despite user checks.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!