Hisense Dishwasher Error FA
⚡ Quick Answer: The Hisense Dishwasher FA error indicates a malfunction in the drain pump, often triggered by the Aquastop flood protection system due to water detect... ✅ DIY Fixable
What Does Error FA Mean?
The Hisense Dishwasher FA error indicates a malfunction in the drain pump, often triggered by the Aquastop flood protection system due to water detected in the base tray. This error may cause the door to remain locked and the drain pump to run continuously, potentially leading to unusual noises during operation. To resolve this issue, inspect the base pan for water and check for leaks.
Common Symptoms:
- Dishwasher displays FA on error display
- Door remains locked
- Drain pump runs constantly
- Possible water detected in base pan/flood tray
Possible Causes
- Water detected in base/flood tray (Aquastop triggered) (medium)
How to Fix Error FA
DIY Fix Check for leaks and water in the base pan
- Turn off and unplug the dishwasher to ensure safety
- Carefully pull the dishwasher out and inspect the base/flood tray for water
- If water is present, soak it up with towels or a sponge
- Check around and under the dishwasher for signs of water leaks
- Ensure inlet and drain hoses have no leaks
Technician Only Inspect Aquastop sensor and drain system
- Disconnect power and water supply
- Remove the dishwasher toe-kick and access the base area
- Check the Aquastop/flood sensor wiring and connectors for corrosion or damage
- Verify the flood tray sensor switch continuity with a multimeter
- Check drain pump and hose routing for blockages that may cause water accumulation
- Replace defective Aquastop sensor or associated wiring as needed
Parts needed: Aquastop/flood tray sensor, Drain pump and hose assemblies, Related wiring harnesses
- If repeated FA errors occur after drying the base pan
- If there is visible water leakage under/around the dishwasher
- If sensor and wiring inspection is beyond user-level capability
Next step
Choose the next step for FA
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | HSDW-PUMP-001 |
| voltage_rating | 120V AC |
Common Questions
What does FA error mean on Hisense Dishwasher?
FA error indicates a drain pump malfunction, often caused by the Aquastop system detecting water in the base tray.
Can I fix Hisense Dishwasher FA error myself?
Yes, you can check for leaks and water in the base pan. Ensure the dishwasher is unplugged before inspecting.
How much does it cost to fix FA error?
Repair costs range from ¥8,000 to ¥30,000 JPY, depending on the parts and labor needed.
When should I call a technician for FA?
Contact a technician if FA errors persist after drying the base pan or if there's visible water leakage.
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!