Hisense Dishwasher Error E2
⚡ Quick Answer: The Hisense dishwasher E2 error indicates a drainage fault, where the machine fails to remove water within the expected time. Symptoms include standin... ✅ DIY Fixable
What Does Error E2 Mean?
The Hisense dishwasher E2 error indicates a drainage fault, where the machine fails to remove water within the expected time. Symptoms include standing water in the bottom of the tub, the dishwasher stopping mid-cycle, and the persistent appearance of the E2 error even after restarting. Common causes include a clogged drain filter, blocked drain hose, or a malfunctioning drain pump. Addressing these issues can help restore normal operation.
Common Symptoms:
- Standing water in the bottom of dishwasher tub when E2 appears
- Dishwasher stops mid‑cycle and displays E2
- Persistent error even after basic restart attempts
Possible Causes
- Clogged or obstructed drain filter or sump area (medium)
- Blocked, kinked, or improperly installed drain hose (medium)
- Drain pump failure or obstruction within pump (medium)
How to Fix Error E2
DIY Fix Check and clear dishwasher drain filter and hoses
- Turn off dishwasher and disconnect power
- Remove bottom rack and locate the filter at base of tub
- Twist and remove filter elements and rinse under warm water
- Check for debris in sump area and clear visible blockages
- Inspect drain hose for kinks or debris and straighten/flush as needed
- Reconnect everything and run a short drain or cancel cycle to test
Technician Only Inspect and test drain pump and related components
- Disconnect power and water to dishwasher
- Remove lower access panel to access drain pump
- Check for obstructions at pump inlet and impeller
- Use multimeter to test pump motor for proper continuity and operation
- Replace drain pump assembly if motor fails tests or is damaged
Parts needed: Drain pump assembly, Drain hose (if damaged)
- If cleaning filters and hoses does not clear the error
- If drain pump hums but does not pump or is silent when powered
- If water appears beneath the dishwasher indicating potential leaks
Next step
Choose the next step for E2
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | HSDW-PUMP-001 |
| voltage_rating | 120V AC |
Common Questions
What does E2 error mean on hisense dishwasher?
E2 error indicates a drainage fault where the dishwasher fails to remove water properly.
Can I fix hisense dishwasher E2 error myself?
Yes, you can check and clear the drain filter and hoses to potentially resolve the issue.
How much does it cost to fix E2 error?
The estimated repair cost for an E2 error ranges from $80 to $250, depending on parts and labor.
When should I call a technician for E2?
Call a technician if cleaning filters and hoses doesn't resolve the error or if the drain pump is silent.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!