Hisense Dishwasher Error E5
⚡ Quick Answer: The Hisense dishwasher E5 error indicates a malfunction in the drain pump, often triggered by the flood sensor detecting excess water. This can cause ... ✅ DIY Fixable
What Does Error E5 Mean?
The Hisense dishwasher E5 error indicates a malfunction in the drain pump, often triggered by the flood sensor detecting excess water. This can cause the appliance to stop operation and may produce unusual noises during cycles. The issue may stem from water inlet or pressure problems, leading to standing water in the base of the unit.
Common Symptoms:
- Dishwasher stops operation with E5 displayed
- Error appears at start or after cycle
- May be associated with standing or excess water in base or water inlet issues
Possible Causes
- Flood sensor activation / excess water detected in base (medium)
- Water inlet or water pressure problem (medium)
How to Fix Error E5
DIY Fix Basic Troubleshooting for E5
- Turn off the dishwasher and disconnect from power.
- Check and clear any standing water at the base (pull out unit and tilt to drain if safe).
- Inspect water inlet hose for kinks, proper connection, and adequate water supply pressure.
- Clean water inlet filter if accessible.
- Restart the dishwasher to see if the error clears.
Technician Only Inspection and Component Diagnosis
- Remove dishwasher from cabinetry to inspect base and check flood sensor operation.
- Test flood sensor continuity and examine wiring harness for damage.
- Inspect water inlet valve and pressure sensors; verify proper water pressure at inlet.
- Check for leaks in hoses, connections, and internal components.
Parts needed: flood sensor, water inlet valve, inlet hose, pressure sensor
- If flooding or leak is present under or near the appliance
- If error reoccurs after basic troubleshooting
- If sensor or inlet components test faulty
Next step
Choose the next step for E5
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Float Switch
Detects the maximum water level to prevent overflow and potential flooding.
- Typical part-only price
- $15 - $40
- DIY difficulty
- Easy
- Estimated time
- 10-20 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E5 error mean on hisense dishwasher?
The E5 error indicates a drain pump malfunction, often due to excess water detected by the flood sensor.
Can I fix hisense dishwasher E5 error myself?
Yes, you can troubleshoot by checking for standing water, inspecting the inlet hose, and ensuring proper connections.
How much does it cost to fix E5 error?
The estimated repair cost for the E5 error ranges from $100 to $300, depending on parts and service.
When should I call a technician for E5?
Call a technician if there is flooding, if the error persists after troubleshooting, or if sensors test faulty.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!